NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

belowfire · 03-31-2012, 08:02 PM

i firgured this would help anyone trying to get the most out of the old 350 or even if they do what i did and swap in a 350

ok so say you got a big budget or if your like me not so big
so the test/base motor you got is a gm crate motor 350/290hp as your starting point and you wanna go with some big hp or maybe just bigger then what this motor puts out
also you can through in any ideas about transmission to bolt up to you motor ideas and gear ratios ideas

this post is to help anyone out with there old iron block 350 that really dont know how to build a motor

thank you for your time and your opinions if you think im leaving something out feel free to add on.

03-31-2012, 08:02 PM	#1
belowfire Join Date: Jul 2011 Location: Brick Nj Posts: 91 iTrader: (0)	engine building idea for hp i firgured this would help anyone trying to get the most out of the old 350 or even if they do what i did and swap in a 350 ok so say you got a big budget or if your like me not so big so the test/base motor you got is a gm crate motor 350/290hp as your starting point and you wanna go with some big hp or maybe just bigger then what this motor puts out also you can through in any ideas about transmission to bolt up to you motor ideas and gear ratios ideas this post is to help anyone out with there old iron block 350 that really dont know how to build a motor thank you for your time and your opinions if you think im leaving something out feel free to add on.