NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

B4C · 05-13-2012, 05:12 PM

For wheel bearings use timken. I would check the u-joint on the axle shaft as well as they will click and bind when they go bad. For the tire wear its probably the hub bearing or ball joints, I would also get it aligned after.

05-13-2012, 05:12 PM	#6
B4C Join Date: May 2007 Location: Jim Thorpe PA Posts: 2,132 iTrader: (1)	For wheel bearings use timken. I would check the u-joint on the axle shaft as well as they will click and bind when they go bad. For the tire wear its probably the hub bearing or ball joints, I would also get it aligned after. Last edited by B4C; 05-13-2012 at 05:13 PM.