NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

donnj · 03-06-2013, 03:01 PM

ok, so I have swapped quite a few 10 bolts over to the LT1/PBR style brakes . I just pulled the axles on a 9 bolt and attempted to bolt up the backing plates and its a different animal all together. The backing plates will bolt up to the rear but theres a gap the thickness of the backing plates between the axle mounting flange to the rear axle housing. Anyone ever do this swap to a 9 bolt?

03-06-2013, 03:01 PM	#1
donnj Join Date: Jul 2009 Location: North Jersey Posts: 464 iTrader: (6)	9 bolt rear to LT1 disc swap ok, so I have swapped quite a few 10 bolts over to the LT1/PBR style brakes . I just pulled the axles on a 9 bolt and attempted to bolt up the backing plates and its a different animal all together. The backing plates will bolt up to the rear but theres a gap the thickness of the backing plates between the axle mounting flange to the rear axle housing. Anyone ever do this swap to a 9 bolt? Last edited by donnj; 03-06-2013 at 03:13 PM.