Quote:
Originally Posted by ar0ck
Brian, did you utilize the stock housing and retrofit the lens or go from scratch? Super clean I like it a lot!
|
The back half are OEM style aftermarket replacement housings (with the fluted lens). The front lens is from an aftermarket clean lens set. It would have been nice to have used the aftermarket clear lens housings but the back half material is garbage whereas the OEM style replacement were much nice. There were also other dimensional differences in the clear housings which was surprising and would have required a ton of modification to make the projectors fit. The intent of these was a clean look to match the truck. The shroud had to be trimmed to fit but I think it works well.
Quote:
Originally Posted by sweetbmxrider
Looks like the one needs to be clocked. They look great though.
|
Passenger def needs more rotation but I'm happy how they turned out. 50% of the time, I get the rotation 100% correct
.
Matt - If you are feeling saucy, all that needs to happen is the big lock nut on the back of the projector needs a slight clockwise rotation (1/8 of a turn?) to make them level. Do not grab the lamp or the lamp holder to do this.