Quote:
Originally Posted by MyFirstZ
It is, its an older model right before he switched designs. At the time I bought Mike the chrome one and myself a wrinkle black one.
I know this doesn't help you to much since you only have one port on each valve cover but this is the connection that I used
http://www.mightymousesolutions.com/#!mm-black/ca5m |
Ant,
When you say "one port on each valve cover," are you referring to the 5/16" hole on the rear drivers side cover as a "port?"** Because there are 0 elbows on the driver's side, and 1 elbow on the passenger's side. They are not symmetrical, as you can see in the picture I posted in the original post.
Sorry if I'm being redundant. I'm just trying to dumb everything down to my speed to be safe!
**5/16" grommet reference
http://ls1howto.com/howto/geniii/ls6pcv/grommet.jpg