[BonzoHansen]

I need wiring diagram for the PL circuit. And I need to know where the harness runs through the vehicle. I have a service manual for an 06-08 I found online (like a 3000+ page pdf lol), but the multiplex pinouts are different, so I wonder what else is different.

LR door lock does not work. No power at the actuator. The other 4 locks all work. I replaced the actuator assembly because the lock has been dead for a while but it suddenly started blowing the lock circuit fuse. So I unplugged the LR actuator and no more fuse problem so I figured the actuator motor was shorting out.

From the diagrams I have the leads from the door lock actuator run directory from the pass side multiplex. one lead for open and one for close comes from the multiplex and at some point the harness simply splits 5 ways according to the 06-08 manual. Same color wires at all 5 locks. No power and no continuity from muliplex to LR lock. so that makes me think i have a harness issue somewhere. But that manual does not show me how the harness runs so I am not sure where to look for an open. I'm not looking to remove the whole interior to figure it out.