So if the inlet on something is say 4.17", should i go with a 4.00" Coupler and stretch it, or go with a 4.25" and clamp her.
Looking to get a silicon coupler for MAF to 92mm TB
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
Last edited by LS1ow; 09-13-2017 at 12:14 PM.
|