|
Want to pre-lube with no real load? Pull the spark plugs out, pull fuse for fuel pump so you're not pumping gas. Make sure the battery is charged up, then hit the key to 'start' and let it spin. No plugs means no compression so there's no real load on the bearings and the oil flow after cranking a while should fill the lifters back up.
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|