Thread: Not this again.
View Single Post
Old 08-15-2018, 06:50 PM   #1898
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
iTrader: (15)
Social Networks:

Okay so while the front end of off I want to address the fog light issue.

I tested the bulbs themselves with a battery, they are good. Can some with a running F body with working fogs(longshot, I know) confirm that with the car not running but key powers the fog lights will turn on? If not, what does it require for foglight illumination? I didn’t see a fog light fuse, so that’s out.

Also when I check the bulb, I checked with the power and ground to eather pins and it works both ways. Not sure if matters on the car. I would assume flipped bulb pins is not the issue since the little light on the fog switch doesn’t light up at all.

Can someone find me a pin out for the fog switch? I think the brown pin would be power in, but It’s like a 4-5 pin connector, so I want to know which one is signal. So if I have power at the switch, I can jump it to the signal wire and check.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote