NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

1QWIKBIRD · 03-05-2010, 09:50 AM

Have you checked to make sure the rear is square in the car? With all the work you've done, maybe the rear is not located properly under the car and is causing a bind in the driveline at speed? Measure from the center of the front wheels to the center of the rear wheels. Should be equal from side to side or very close. This is a long shot and there would have to be a pretty big difference to cause the problem, but ?????

Chris

03-05-2010, 09:50 AM	#33
1QWIKBIRD 11 Second Club Join Date: Nov 2005 Location: Hamilton Twp, NJ Posts: 855 iTrader: (5)	Have you checked to make sure the rear is square in the car? With all the work you've done, maybe the rear is not located properly under the car and is causing a bind in the driveline at speed? Measure from the center of the front wheels to the center of the rear wheels. Should be equal from side to side or very close. This is a long shot and there would have to be a pretty big difference to cause the problem, but ????? Chris __________________ 1999 Formula 6spd (The driver) 1997 2500 Ext. Cab Dodge 4x4 CTD 5spd (The Earth Mover) 1970 Nova 5spd (The toy)