|
Could see if you could get a hold of TAdan, if I recall I think he said his dad is good a tuning and working on the CC Q jets. Or can see if you can get in touch with a couple of people on thirdgen.org there are several people over there that are good with it. Can't think of names off my head. I had issues but even I got my CC Qjet working. I think in my case the timing was off. It would fire and die, I was way out. Put a wrench on the crank turn it til the motor is at TDC number one on the compression stroke (I know its basic) set the motor at the timing marks then check the distributor.
Will it run long enough for you to get out and play with the distributor?
|