NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

LS1ow · 03-25-2019, 04:36 PM

Many a thing has happened since last update. Work has been terrible lately, so ive only had about 20-30 mins a day to work on the car, if any.

Got these nice pieces in the mail...

Aluminum Solenoid bracket for LS Manifolds:

Hardline Kit for the Fast manifold plate kit:

I actually ran into a few days of down time due to the hardline kit. I could not get them to work at all. No matter what i did. After a few back and forth convos with the guys at Nitrous Express, they came to the conclusion they accidentally sent me a line kit for a LS3 manifold and not a LS/Fast. They overnighted me a new line kit, and everything was perfect.

while trying to figure out the hardline kit issue, tossed the fuel pressure sensor into a 1/8th NPT port AN fitting.

and installed right were the main fuel line feeds to the rail.

and also made a little harness for the solenoid and purge wires, so they can be tucked away nicely.

03-25-2019, 04:36 PM	#2032
LS1ow Power Member / trans break does not equal transbrake Join Date: May 2009 Location: The Meadowlands Posts: 4,513 iTrader: (15) Social Networks:	Many a thing has happened since last update. Work has been terrible lately, so ive only had about 20-30 mins a day to work on the car, if any. Got these nice pieces in the mail... Aluminum Solenoid bracket for LS Manifolds: Hardline Kit for the Fast manifold plate kit: I actually ran into a few days of down time due to the hardline kit. I could not get them to work at all. No matter what i did. After a few back and forth convos with the guys at Nitrous Express, they came to the conclusion they accidentally sent me a line kit for a LS3 manifold and not a LS/Fast. They overnighted me a new line kit, and everything was perfect. while trying to figure out the hardline kit issue, tossed the fuel pressure sensor into a 1/8th NPT port AN fitting. and installed right were the main fuel line feeds to the rail. and also made a little harness for the solenoid and purge wires, so they can be tucked away nicely. __________________ 99 Z28 - SBE LS1/60e Motor - 10.84 @ 128 - 1.47 60' Nitrous - 10.16 @ 132 - 1.40 60"