Ok so heres were we are at.
It has been a pretty hectic few weeks at the beggs household. 2, ill call them, family emergencies back to back rendered me very busy handling other things.
Last we left off, i had to ditch the 3 point SFCs due to not working with my torque arm. Pulled them off, try to install X member, and STILL contacts the exhaust. Right at the X cross over. So i pulled the exhaust back off, and had to do some reshaping. Clamped down the 4 ends of the X pipe to my bench and went at it with a lot of heat, a mallet, and after a few burns a pair of gloves.
Was able to clearance the pipe. Barely had to form it really, it was just touching. Now there is about the thiccness of iphone clearance.
Today i wont have time due continuing handling newly acquired duties, but tmmr i should have time to throw the rest of the exhaust back together.
DS is finally in as well. Need one of my friends to come by to help bleed the brakes, and then i should be able to get it rollin.