View Single Post
Old 08-05-2019, 10:00 AM   #2
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,353
iTrader: (3)
Quote:
Originally Posted by LS1ow View Post
time to get the new rear peppered in advance of 10 bolt destruction.

I picked up the rear out used out of a 6 speed car, and it has 4.10s in it. So no bueno for me.

Without any confirmation other than word from the previous owner, my car currently has 3.42s in it. With those 3.42, i trapped a best of 124. But i do not remember what RPM i went threw at, nor was i logging data.

The car has a 26" tire, stock geared 60e and makes about 430 on motor and will be getting 100/150 of Nitrous.

Since the rear going is is a ford rear(8.8) i have been made to beleive ford racing provides the best gear quality wise, so i will most likely be going with them.

Making my choices most likely 3.73 or 3.55.


and yes, i tried all those gear calculator things, they blow.
What are you spinning the engine to?

I expect you will see 10+ mph with that shot so the maths should be easy on what you will need at the end of a run. Worst case if it's trapping with more bald eagles than anticipated, you can go to a taller tire. Then when you go with the turbos, you will be reassessing this all over again.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is offline   Reply With Quote