NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - 4th gen F-body front chassis section/frame horns

V · 02-28-2018, 05:30 PM

I have the front chassis section cut from a 2002 Firebird Formula.

If you wrecked a 4th gen in the front, you probably need part, or all, of this.

Same for 98-02 Camaro/Firebirds and will work for 93-97 cars with just some holes/mounts being slightly different.

Was NOT from an accident car.
Rails are straight and cut right behind the wheel-well/doghouse panels.
Some slight surface rust here and there. Primer had been sprayed on cut areas and surface rust at time of removal.

Asking $400 OBO.

I also have...
Both rear 1/4 panels from this car (93-02 Firebird/TA) $200 each.
Passenger rear 1/4 panel from a 97 camaro (93-02) $200
Metal impact bars and reinforcements for 93-97 camaro($30), 98-02 camaro($50), and 98-02 firebird base/formula($50)

02-28-2018, 05:30 PM	#1
V Stalker Join Date: Aug 2004 Posts: 12,077 iTrader: (12)	4th gen F-body front chassis section/frame horns I have the front chassis section cut from a 2002 Firebird Formula. If you wrecked a 4th gen in the front, you probably need part, or all, of this. Same for 98-02 Camaro/Firebirds and will work for 93-97 cars with just some holes/mounts being slightly different. Was NOT from an accident car. Rails are straight and cut right behind the wheel-well/doghouse panels. Some slight surface rust here and there. Primer had been sprayed on cut areas and surface rust at time of removal. Asking $400 OBO. I also have... Both rear 1/4 panels from this car (93-02 Firebird/TA) $200 each. Passenger rear 1/4 panel from a 97 camaro (93-02) $200 Metal impact bars and reinforcements for 93-97 camaro($30), 98-02 camaro($50), and 98-02 firebird base/formula($50)