NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

IllusionalTA · 10-12-2015, 07:57 AM

few questions, did you measure your installed height? The fact that you've had a vj, has changed that installed height,that combined with the cam, has def altered your pushrod length, myself like you don't run typical preload, I usually hang out at .035 or so give or take a few..you can always grab a caliper and get the exact length of the checker, I've never liked the screw method as there is some slop in tool itself, and it spins very easily..

10-12-2015, 07:57 AM	#11
IllusionalTA Join Date: Oct 2015 Posts: 1 iTrader: (0)	few questions, did you measure your installed height? The fact that you've had a vj, has changed that installed height,that combined with the cam, has def altered your pushrod length, myself like you don't run typical preload, I usually hang out at .035 or so give or take a few..you can always grab a caliper and get the exact length of the checker, I've never liked the screw method as there is some slop in tool itself, and it spins very easily.. Last edited by IllusionalTA; 10-12-2015 at 07:58 AM.