No Signal for Starter
Figured more eyes = moar better.
Long story short, there is nothing to signal the starter relay when the key is turned. I was able to jump the relay using a wire to get the car started. Swapped the starter relay with a known good relay and still no dice. This leads me to believe there is an issue with the wiring of my 6 pin gear selector switch, or maybe another wiring issue all together.
There is power at the 85 and 30 pin of the relay, 87 goes to the starter, 86 goes to the BCM, which is the ground.
So what it looks like, to me atleast, the key isnt grounding out the relay. Thus no complete circuit.
However if were to ground out the 86 pin, would that render it on at all times?
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|