Ran into an issue with the sway bar, so need to call UMI to verify something. I double checked part numbers against the little inventory sheet that comes in the box, and it checks out, but i think they may have sent me the wrong mounts for the stock rear. There is about 180* of possible surface for the mount to make contact with, about 60* of it.
Little difficult to capture in pics, but you can deff see it.
Also, removed the rear bumper of the car to take out the rear bumper support, as i planned to whip up a tube one to save some LBS, and snapped all 3 bolts on each side. So that bumper support is not a permanent piece of the car.