NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

IROCZman15 · 03-10-2016, 07:23 AM

I used RAAMTatt 60 BXt on the floor of my car back in 2010 after I did the POR15 undercoating project. I can definitely say that it was well worth it. while it is heavy and will add weight, it definitely cut down on the noises. My noise was mostly from the gear whine with the richmond 3.73's but even though I can still slightly hear them whine, it is a big difference. I didn't have any rattles or anything (and still don't have any that I notice) but the sounds deadener is good. it cut down on the "road noise" as I can tell only when I have the windows up, but 99% of the time I have the windows rolled all the way down unless it is cold out. I did not do any of the doors, roof, or trunk and probably never will since I don't need to.

heres a link with some photos. photos are about half-way down the page

http://www.freewebs.com/iroczman15/workdonein2010.htm

03-10-2016, 07:23 AM	#2
IROCZman15 10 Second Club / Meet Coordinator Join Date: Dec 2004 Location: Roxbury, NJ Posts: 2,101 iTrader: (8)	I used RAAMTatt 60 BXt on the floor of my car back in 2010 after I did the POR15 undercoating project. I can definitely say that it was well worth it. while it is heavy and will add weight, it definitely cut down on the noises. My noise was mostly from the gear whine with the richmond 3.73's but even though I can still slightly hear them whine, it is a big difference. I didn't have any rattles or anything (and still don't have any that I notice) but the sounds deadener is good. it cut down on the "road noise" as I can tell only when I have the windows up, but 99% of the time I have the windows rolled all the way down unless it is cold out. I did not do any of the doors, roof, or trunk and probably never will since I don't need to. heres a link with some photos. photos are about half-way down the page http://www.freewebs.com/iroczman15/workdonein2010.htm __________________ 1987 IROC-Z - modified Last edited by IROCZman15; 03-10-2016 at 07:25 AM.