NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

madness410 · 01-07-2013, 11:11 AM

yeah adam i thought the same thing. i went outside to mess around with it some more and see if the coolant level was low or if it was leaking coolant somewhere. no coolant in the engine bay or under the car. took it for a spin around the block, gauge still at 0, fans still on...so i keep it idling there and im doing something to my jeep parked right next to the camaro while its idling...and next thing i hear is a click and the fans go off...walk over and check the gauge and its at 210. ses light still on i took the scanner and erased it. so it works great now i guess i made a dumb mistake yesterday and didnt let it warm up enough. just hope when i did drive it with no coolant flow that there is no damage to the motor. thanks for the help guys.

Jon

01-07-2013, 11:11 AM	#10
madness410 Join Date: Mar 2008 Location: Somerset, NJ Posts: 4,223 iTrader: (5)	yeah adam i thought the same thing. i went outside to mess around with it some more and see if the coolant level was low or if it was leaking coolant somewhere. no coolant in the engine bay or under the car. took it for a spin around the block, gauge still at 0, fans still on...so i keep it idling there and im doing something to my jeep parked right next to the camaro while its idling...and next thing i hear is a click and the fans go off...walk over and check the gauge and its at 210. ses light still on i took the scanner and erased it. so it works great now i guess i made a dumb mistake yesterday and didnt let it warm up enough. just hope when i did drive it with no coolant flow that there is no damage to the motor. thanks for the help guys. Jon __________________ Jon 1999 Trans am WS6 1996 Corvette LT4 6 speed Last edited by madness410; 01-07-2013 at 11:12 AM.