Quote:
Originally Posted by LTb1ow
@ tech thread.
I'll just wait for Adam to explain.
|
Only referenced because of Adams post lol I like the factory look over a random relay hanging off the body
Quote:
Originally Posted by sweetbmxrider
They changed the colors. 30 is battery feed. 87 goes to your accessory, the pump. Gm spliced 86 into 30 so you are going to have to snip that and run it to a wire that has power with key on/running engine. I believe I went to the abs fuse since I removed it. You could splice into it if you are keeping it, we are just sending a signal to the relay to switch. 85 originally goes to the pcm as it sends the ground signal to command the air pump on. This will be permanently grounded to the body wherever you want. If you need clarification or other fun wiring stuff, just ask.
|
Thanks Adam! Your repsonse is plenty clear enough, I eventually figured it out by setting the relay up outside to figure out what's what, hopefully it works the same when I put it back lol
__________________
1997 Camaro Z28 - 355 LT1, T56, CC503, LTs, ORY, Bald Eagle-back exhaust, !emissions, Lingenfelter CAI, EWP, !CAGS, BMR LCAs, UMI PHB, Koni Str.t/Koni SA, C5 Z06 front / LS1 F-body rear brake swap, factory hurst with short stick
2014 2LT Cruze 2.0 Turbo Diesel
|