[KirkEvil]

Your Crane cam 1449601
228/232 @ .050
290/294 @ .006
112 LSA
107 ICL

Assume PTD = .006", TFS 61cc chambers, this is what I am coming up with -

.035" thk head gasket:
Quench = .029"
SCR = 11.63:1
DCR = 8.68:1

.040" thk head gasket:
Quench = .034"
SCR = 11.47:1
DCR = 8.57:1

.045" thk head gasket:
Quench = .039"
SCR = 11.32:1
DCR = 8.46:1

.051" thk head gasket:
Quench = .045"
SCR = 11.15:1
DCR = 8.34:1

I think .040" gaskets would be safe for your setup and you should have no problem running 92/93 pump. With that cam you run into piston to head clearance issues before you reach a compression limit for pump gas.

I am curious to hear what TTP recommends you do