BlackbirdWS6's Blown 1997 Firebird TA WS6 Convertible 6spd
There is a build thread documenting most of what occurred while building the car however it got a bit lengthy. This is the consolidated thread for those interested in just the details.
As some of you know, much of this would not have been possible without the help of the JSFBOA, other friends, and my wife. The build was certainly not a walk in the park but when I'm older and look back, it will give me a ton of fond memories. Everything was built in-house aside from the exhaust from the headers back. The roll bar was welded at a friends shop.
The Car:
1997 Firebird TA WS6 Convertible 6spd
GMHTP Feature - January 2012
Performance:
709RWHP / 616RWTQ - Dynojet/tuned by RPM
11.3@131 on 2.0 60' - Will be working on this next season
Mods:
Engine:
350 block bored 30 over and clearanced for a 3.75 stroker crank
4-bolt splayed mains - ARP hardware
Callies Dragonslayer Forged Crank - 3.75 stroke
Callies Compstar Forged 5.7 Rods
JE Forged Blower Pistons -31cc
Clevite H-Series Bearings
LE 21 deg Trickflow heads (300+ CFM intake @ .600 lift)
LE Ported Intake
LE Blower Cam - Mild
AS&M 58mm TB
Comp Ultra 1.6 RRs
Comp Hi-Tech Pushrods
LS7 Lifters
Cloyes Double Roller Timing Chain
ATI Superdamper
LPP LT Headers, Mufflex Custom Y, Mufflex 4" single-in/out 4" magnaflow
Power Adder:
Procharger F1-A 12-rib race kit, 15lb pulleys, twin 3.5" intercoolers
Custom Machined Crank Pulley Spacer
ATi Big Red Open Bypass Valve
Fuel:
80lb High Impedance Siemens Injectors
Lonnies Double Pumper Fuel System
Snow Stage 2 Meth
Drivetrain:
Tick Level 3 T-56
McLeod Street-twin Clutch - Steel Flywheel
Strange Chromoly Driveshaft
Strange S60 Rear - 3.73 Gears/Tru-Trac
PCM:
EFI Connection 24x LS1 PCM Conversion
Custom engine harness
Suspension:
Kenne Brown Double Diamond Subframe Connectors
Strange DA Rear Shocks
RK Sport Panhard Bar
UMI Adj. LCAs
UMI Chassis Mount Torque Arm
UMI LCA Relocation Brackets
Wolfe 6-point Roll Bar
ICE:
Alpine Headunit
Alpine CD Changer
JL W1 10" Subs
Wheels/Tires:
18" AR TTIIs - 18x8 Front / 18x10 Rear
BFG KDW2 - 245/40 Front / 295/35 Rear
Custom Stuff:
LEDs used nearly everywhere
BLS Bi-Xenon Projector Headlight Kit
Stainless Emblems, Ram Air Grills, Etc
Some custom interior bits here and there
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Last edited by Blackbirdws6; 01-03-2012 at 07:21 PM.
|