In picture!
The Victem:
The Culprit!
The Tools!
The Solution!
The CURE!
El Tee Juan!
The Product !
Steps:
1. Take empty bottle of herbal essence
2. Cut off 3" from the bottom of the Herbal Essence Bottle
3. Remove Stock LT1 Intake Elbow
4. Remove Wisper Tube (Donkey Dong)
5. Replace with 3" cut bottle bottom
6. Re-Use original tube's clam
7. Jam bottom piece in as far as it will go, it should leave at least 1.5" exposed
8. Re-Install Intake Elbow
9. Check for leaks!
10. FINISHED!
I also made a home-depot intake using a piece of 3x8 Ducting going from the mass air sensor, to the bottom intake housing. Pics to follow!