So when the fitting is tight, does the line have play in it? And the stainless has a bubble flare as well? If it were leaking, you should have fluid coming out there. You didn't say either way, just curious. You could even take the rear feed line off and bleed with your finger at the module like you would a master. If you still don't have fluid/pressure, try at the feed line into the module. Nothing there, bleed the master. Fun times! Let us know how you make out.
Quote:
Originally Posted by 6spdg37s
never had to bleed the module done tons of GM cars /trucks (the brake lines rot out )lol
|
It depends, I've done many complete systems on gmt-800's and have had to bleed the abs module sometimes. Other platforms as well, never an f-body personally.