did a leak down test last night on cyl 1. did it 4 different variations as youll see below.
Dot to dot, push rods installed. rockers not torqued but seated onto the rocker tray.
[url=https://flic.kr/p/DjzwnG]
cam gear at 12, crank gear at 12, pushrods and rockers same as previous.
[url=https://flic.kr/p/21sghD2]
Dot to Dot, no pushrods or rockers.
[url=https://flic.kr/p/21sghzp]
12 and 12, no rods or rockers.
[url=https://flic.kr/p/21pxqxL]
All 4 tests pass. Air could be heard hissing from the crank case(i dont have the timing cover on) but the gauge says its only 14-16% loss, which passes. unless im understanding it wrong.