Quote:
Originally Posted by redsoxsstink
if you want to take it on yourself, the above mentioned methods are acceptable. most wheels are lug centric anyway meaning the lugs support the load of the vehicle, the hub is used to "center" the wheel so the lugs can tighten them evenly. it doesn't need to be perfect to work just some extra care when tightening to make sure its centered.
|
Factory wheels are hub centric and lug centric, besides these are higher end wheels so no hole saw and If I'm boring them out if rather make them hubcectric while I'm at it. Need to go to 77.8mm from 72.6