NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - Anyone ever weld a nut to a stripped bolt?

griftymcgrift · 11-19-2008, 11:21 AM

if the allen is still sticking up, get a bolt big enough to go over it and really weld it on, then heat the area around it w/ a torch....at the same time, try turning the nut...two man job, but it should work.

11-19-2008, 11:21 AM	#5
griftymcgrift Join Date: Mar 2008 Location: Alloway, South Jersey Posts: 67 iTrader: (0)	if the allen is still sticking up, get a bolt big enough to go over it and really weld it on, then heat the area around it w/ a torch....at the same time, try turning the nut...two man job, but it should work.