His problem is not tire balance. He replaced 2, no change. He rotated, no change. He's very likely got a drive line issue
Quote:
Originally Posted by Mark42
Unless you are actully looking for an out of round, I doubt you will notice 3/8" run out. And the guys balancing the tires probably wouldn't notice either. Its not obvious until something is held near the tire as it spins to see the gap change.
keep on looking, the problem will be found eventually.
|
My 10 years in the business says otherwise, but maybe I did a better job than others. So maybe. But rotation would have highlighted that in an instant as the vibration would have changed.