|
4th gen Convertible top FRAME parts
I had a buyer for some specific parts of the top frame so I took the whole thing apart and now I have the individual components.
I'm open to offers and package deals.
I have the following:
Inner bows $25
Rear bow/plate/staple pad $20
Front aluminum header panel(corner broken off but works fine)(new $530+) $50
driver side cast aluminum top section $50
passenger side cast aluminum top section $50
Side cast aluminum frames(to rear of windows) $50 each
Interior header plastic trim $40
Side trim over doors(one bare plastic, one has cloth still on it) $50 pair
Front top latches $20 each
Hydraulic rams with pump and lines $125
Weather stripping top driver door, w/rail $40
Weather stripping rear driver door, w/rail $40
Weather stripping top passenger door(one or two small cuts), w/rail $20
Weather stripping rear passenger door, w/rail $40
Side small cast aluminum triangle sections $40 each
glass rear window $25
1 defroster wiring section(approx 15" from one connector to the other) $10
|
