 |
|
10-21-2006, 08:48 PM
|
#1
|
|
Stalker
Join Date: Aug 2004
Posts: 12,080
|
Problem? with headers...
i just got my QTP headers yesterday, today i bolted them up to the motor quickly to see how they look/fit, a friend then pointed this out to me...
The Passenger side header primaries are not fully welded around like the drivers side is... WTF? i guess on monday i'm taking a drive to QTP....
|
|
|
|
10-21-2006, 08:59 PM
|
#2
|
Join Date: Dec 2005
Location: Boston/North
Posts: 9,214
|
that's weird...
__________________
Quote:
Originally Posted by BonzoHansen
dumbass.
|
|
|
|
|
|
10-21-2006, 09:03 PM
|
#3
|
|
Stalker
Join Date: Aug 2004
Posts: 12,080
|
...like if its a screw up, ill drive the 15 or so min to QTP and exchange it for a finished one, no big deal, but i just dont feel comfortable running the car like that and i'd rather not have to make it an issue through Thunder Racing which i ordered them through.
|
|
|
|
|
10-21-2006, 10:18 PM
|
#4
|
Join Date: Aug 2004
Location: Somerset County
Posts: 5,559
|
good thing you caught it
__________________
1999 Corvette FRC
|
|
|
|
|
10-22-2006, 01:10 AM
|
#5
|
|
13 Second Club / Moderator
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,694
|
i'll check mine on monday and see if mine are the same. that looks odd and it prob would leak.
__________________
Quote:
Originally Posted by LS1ow
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
|
|
|
|
|
|
10-22-2006, 01:13 AM
|
#6
|
|
Stalker
Join Date: Aug 2004
Posts: 12,080
|
on ls1tech, they said those outer welds just hold the pipes in place so they can be welded on the inside, and they arent "functional" welds. but even if thats the case.. i want them to match damn it! i'm hoping alex pops in here and can give me a heads up, i dont wanna PM him and bother him, lol. i figure i may just call QTP monday and run up there
|
|
|
|
|
10-22-2006, 10:24 AM
|
#7
|
|
I will beat you with a toaster!
Join Date: Sep 2004
Posts: 6,054
|
I highly doubt they will leak because of the inside welds, however im with you Paul Id want them to match atleast.
__________________
___________________
|
|
|
|
|
10-22-2006, 10:27 AM
|
#8
|
Join Date: Sep 2004
Location: Ramsey, NJ
Posts: 1,140
|
I'd want them to match too, definitly doesn't look right.
|
|
|
|
|
10-22-2006, 11:13 AM
|
#9
|
Join Date: Nov 2004
Posts: 3,530
|
for the price...they should match.
|
|
|
|
|
10-22-2006, 05:33 PM
|
#10
|
|
Stalker
Join Date: Aug 2004
Posts: 12,080
|
AND the one side of the y-pipe does NOT slide onto the header. i had to open it up even a little and it still wont go... i'm not to impressed so far by these headers... I will be calling/visiting QTP tomorrow...
|
|
|
|
|
10-22-2006, 06:39 PM
|
#11
|
|
MIR
Join Date: Jul 2005
Posts: 9,692
|
**** for that price they better come out of gods anus and add 11ty billion horsepower! get that **** fixed son.
|
|
|
|
|
10-23-2006, 08:57 AM
|
#12
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Those definetly look like tacks for finish welding. That header probably was not supposed to make it past their QC.
|
|
|
|
|
10-23-2006, 12:15 PM
|
#13
|
|
Stalker
Join Date: Aug 2004
Posts: 12,080
|
i called just before... and i explained my situation about the welds and the y-pipe, they guy put me on hold then came back and asked for my number and said hed have someone call me back... that was almost an hour ago... if i dont get a call back today, ill be waiting at their door when they show up for work tomorrow....
|
|
|
|
|
10-23-2006, 12:32 PM
|
#14
|
|
13 Second Club / Moderator
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,694
|
mine both look like your passenger side header, except for one primary on the drivers side. kinda annoying now that you pointed it out 
__________________
Quote:
Originally Posted by LS1ow
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
|
|
|
|
|
|
10-23-2006, 01:35 PM
|
#15
|
Join Date: Apr 2006
Location: Montville
Posts: 110
|
Mecahnically they should both be fine, but it would bug me that they dont match. Just about every header I have seen is like our passenger side, tacked on the outside, fully welded on the inside.
__________________
Nick  
97 Camaro SS, M6, Artic White, t top.
396, AFR 210's, single plane, Strange 12 bolt.
|
|
|
|
|
10-23-2006, 03:58 PM
|
#16
|
|
Stalker
Join Date: Aug 2004
Posts: 12,080
|
Quote:
|
Originally Posted by qwikz28
mine both look like your passenger side header, except for one primary on the drivers side. kinda annoying now that you pointed it out |
call QTP right away, he'll take care of it. I mentioned that to him about yours and he said its impossible, and if so he wants to know and see it and he'll correct it. i was up there this afternoon and he looked at mine and said they should just be tacked on the outside, NOT fully welded, he gonna go to the "other" buildign where the fabricate them and see whats going on. my fully welded on should not be like that. as for the y-pipe issue, we discussed it quite in depth and everything was taken care of/will work out, so thats all good.
|
|
|
|
|
10-23-2006, 05:23 PM
|
#17
|
|
MIR
Join Date: Jul 2005
Posts: 9,692
|
its suppose to be like that? why are they making them uglier? it looks much nicer if you weld them all the way around on the outside...
|
|
|
|
|
10-23-2006, 07:19 PM
|
#18
|
|
Resident Camera Guy
Join Date: Aug 2004
Location: North Jersey
Posts: 10,971
|
Its merely cosmetic. I called Paul about it earlier. Whats important is on the inside of the flange (the side on the head) They vary because they come from different production runs. What happens is when we have finished headers we lay them all out seperate to sides and then re-package them to make sure everythings ok. I just honestly never noticed the two different welds when I do the packing.
What was the deal with the y-pipe? I've heard of similar things happen before, but it was just how they were put together.
If anyone else with the headers has a problem, just give us a call. We always hook up the local people.
__________________
|
|
|
|
|
10-23-2006, 07:57 PM
|
#19
|
Join Date: Feb 2005
Location: Orange County NY
Posts: 579
|
one word to correct this problem KOOKS
__________________
2000 Camaro 25.5 Turbo car  X275
|
|
|
|
|
10-23-2006, 10:21 PM
|
#20
|
|
Stalker
Join Date: Aug 2004
Posts: 12,080
|
the y pipe issue couldnt be clearly figured out, because i "didnt know what i was doing" by trying to open up a pipe to fit that way 2 times to small to begin with. yes, i dimpled it quite a lot, but even with the last 1/4 opened up a lot it still didnt fit, plus the collector on the one headers is out of round, i'm having it taken care of at a local exhaust shop. The guy then brought out "my header" sayign he measured it and it was perfectly round, then turns out he had switch the header without telling me, and gave me one with a hole in it, which he cought luckily before i left, so then i got my original one back, which he said to have an exhaust shop check for roundness.... so apparently it was damaged in shipping if the collector was ovaled, and the y pipe end ovaled as well... but he said it wasnt shipping damage when i said i'll make a claim with ups then... so i dunno...
The guy at QTP was helpful about explaining the process how the headers y pipe are made and how to assemble it, but i still do think quality control needs to be looked at. I am not satisfied with the two mismatched headers, especially after i sent the time and money to paint the engine compartment and powder coat all the brackets... but whatever, i learned my lesson, listen to the problem other have had and dont think youll be any different....
i am currently thinking about selling the qtps and buying kooks...
Last edited by V; 10-23-2006 at 10:25 PM.
|
|
|
|
|
10-23-2006, 11:09 PM
|
#21
|
|
13 Second Club / Moderator
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,694
|
kooks is very similar in design and supposedly the collector on the QTP headers are better. i think this is a no win situation. just let qtp do what they can to make it fit and leave it at that
__________________
Quote:
Originally Posted by LS1ow
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
|
|
|
|
|
|
10-24-2006, 04:38 PM
|
#22
|
|
Resident Camera Guy
Join Date: Aug 2004
Location: North Jersey
Posts: 10,971
|
You delt with my amazing boss Barry. I just hope you guys don't get the wrong impression of me or any of the other employees. I tried to help as best as I could, but again Im limited.
__________________
|
|
|
|
|
10-24-2006, 04:47 PM
|
#23
|
|
Stalker
Join Date: Aug 2004
Posts: 12,080
|
well, i wont be buying anything QTP in the future, apparently going to SEMA is SUCH a big deal, but it still shouldnt affect their production times or customer service... but whatever, they made the sale, they got my money.. end of story
|
|
|
|
|
10-25-2006, 12:02 PM
|
#24
|
|
Keyboard Tough Guy
Join Date: Jul 2004
Location: Trenton, NJ
Posts: 6,341
|
Alex correct me if im wrong but I heard QTP's headers were being manufactured BY kooks?
|
|
|
|
|
10-25-2006, 12:05 PM
|
#25
|
|
Keyboard Tough Guy
Join Date: Jul 2004
Location: Trenton, NJ
Posts: 6,341
|
BTW my pacesetters were beautiful
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
