 |
03-02-2007, 11:08 AM
|
#1
|
|
NJFBOA Supporting Sponsor
Join Date: Oct 2005
Location: Clifton, NJ
Posts: 98
|
2005 Cadillac CTS-V 403ci Prelim Results..
Many of you guys that are friends with our shop know of this car. It's my best friend's 2005 CTS-V, billy moscato. Here's the prelim details:
2005 Cadillac CTS-V
TTP Built 403ci Motor
TTP Stage 5V 225cc AFR Heads
TTP Stage 5V Camshaft
LSX 90mm/TPIS 90mm TB
Meziere Electric Water Pump
TTP Stage 3 A-K T56 Build
- SPEC Stage 3+ Clutch Kit
Stainless Works 1 3/4" Longtubes
TTP Custom X-Pipe
Corsa Catback Exhaust
Uncorrected numbers were 508rwhp/483rwtq making over 400rwtq after 3k rpm (SAE was 494/467 i believe) with 110 miles on the fresh motor running at 12.0:1 air fuel for now. Once we get 500 miles on her over the weekend we will be redynoing her on Monday or Tuesday for some numbers after the motors seen some more street mileage.
I will post the final graph early next week.
__________________
www.ttperformance.net - 973-256-1234
5 Cardinal Drive
Little Falls NJ 07424
- TTP Race Car Fabrication: Custom fabrication completed in-house. Taking orders for winter; Pro-Mod, Pro-Stock, Top Sportsman, Outlaw.
- Full custom alignments completed in-house
- Full Custom Exhaust Setups. All bending done in-house.
|
|
|
|
03-02-2007, 11:10 AM
|
#2
|
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,476
|
Damn.....that car is such a beast.
What # rear is he on now? 
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
|
|
03-02-2007, 11:11 AM
|
#3
|
Join Date: Sep 2004
Location: Haledon, NJ
Posts: 5,162
|
I saw billy post the numbers on myspace.. BEAST!
__________________
1989 IROC-Z 355 LT1 T56 Swapped
2016 Chevy Colorado LT 3.6 v6
2008 Jeep Grand Cherokee Laredo 4.7L RIP 12/29/2016
1998 Honda CBR 600F3
2003 Yamaha FX140
|
|
|
|
|
03-02-2007, 11:42 AM
|
#4
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,165
|
Quote:
Originally Posted by Tru2Chevy
What # rear is he on now? |
No kidding. I was thining about getting a used one, then I read about then difs in those. No thanks.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
03-02-2007, 12:50 PM
|
#5
|
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,476
|
Quote:
Originally Posted by BonzoHansen
No kidding. I was thining about getting a used one, then I read about then difs in those. No thanks.
|
Last I heard he was on #5.....but that was last March, so who knows by now.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
|
|
03-02-2007, 01:14 PM
|
#6
|
|
13 Second Club / Moderator
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,694
|
thats amazing through the caddy drivetrain... good stuff guys
__________________
Quote:
Originally Posted by LS1ow
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
|
|
|
|
|
|
03-02-2007, 01:41 PM
|
#7
|
|
13 Second Club
Join Date: Jul 2004
Location: Ewing/Galloway, NJ
Posts: 3,904
|
correct me if im in the wrong, but dont LSx cars put down those numbers with just a cam and bolt ons?
__________________
EB
99 Riviera, Bone stock, 14.34 @ 96 "Walking 5.0's in luxury" RIP
95 Cherokee, Bone stock 16.2 @ 83 "Treeing your 3rd gen and beating it to the line despite trapping less....and looking better"
93 TA, Bone stock, 13.8 @ 100 "Beating ****** drivers in ****** LS1's"
https://www.facebook.com/groups/285090241699967/
R.I.P. Tia 
|
|
|
|
|
03-02-2007, 01:54 PM
|
#8
|
|
NJFBOA Supporting Sponsor
Join Date: Oct 2005
Location: Clifton, NJ
Posts: 98
|
NUmber 6..
If you show me a LSx car that makes that cam only with bolt-ons I'd love to see how rigged the dyno was that it did it on 
I have made a max of 447rwhp/407rwtq with cam only with ls6 heads and all the bolt-ons.
__________________
www.ttperformance.net - 973-256-1234
5 Cardinal Drive
Little Falls NJ 07424
- TTP Race Car Fabrication: Custom fabrication completed in-house. Taking orders for winter; Pro-Mod, Pro-Stock, Top Sportsman, Outlaw.
- Full custom alignments completed in-house
- Full Custom Exhaust Setups. All bending done in-house.
|
|
|
|
|
03-02-2007, 02:09 PM
|
#9
|
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,476
|
Doesn't the IRS rob more power than a live axle too?
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
|
|
03-02-2007, 02:37 PM
|
#10
|
Join Date: Sep 2004
Location: Ramsey, NJ
Posts: 1,140
|
that caddy is so beastly 
|
|
|
|
|
03-02-2007, 10:16 PM
|
#11
|
|
13 Second Club / Moderator
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,694
|
Quote:
Originally Posted by Tru2Chevy
Doesn't the IRS rob more power than a live axle too?
- Justin
|
yes.... and the cts-vs have a very odd driveshaft that also robs a lot of power.
and eric- the average cam-only ls1 makes about 390-410rwhp. i'm shooting for 420rwhp with a heads/cam ls1.
__________________
Quote:
Originally Posted by LS1ow
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
|
|
|
|
|
|
03-03-2007, 07:03 AM
|
#12
|
|
11 Second Club
Join Date: Jan 2005
Location: Fishkill, NY
Posts: 1,278
|
Quote:
Originally Posted by Squirrel
correct me if im in the wrong, but dont LSx cars put down those numbers with just a cam and bolt ons?
|
There are heads/cam cars out there making that kinda power but not just cam only. I'm hoping that through a 12 bolt and A4 mine will make in the 475-485range since I have seen similar M6 cars pushing over 500 to the wheels with just 346CI. Is it a Mustang Dyno or a Dynojet? Damn impressive either way through the Caddy drivetrain
__________________
-Nick
9/11/01- Never Forget
2002 Pontiac Trans-Am WS6 # 206
Chasing 10's
469RWH/437RWTQ
11.05 @ 123
Last edited by Batman; 03-03-2007 at 07:04 AM.
|
|
|
|
|
03-04-2007, 11:52 PM
|
#13
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
that car is no joke....very very nicely put together.... had the opportunity to meet the ttp staff a few weeks ago with my buddy neil... must say they are all very nice people..... they have a very nice set up with a very knowledgable helpful staff...
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
|
03-05-2007, 12:34 PM
|
#14
|
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,476
|
Quote:
Originally Posted by Batman
Is it a Mustang Dyno or a Dynojet? Damn impressive either way through the Caddy drivetrain
|
I'm sure those numbers were recorded on their Dynojet....can't imagine Billy having it dyno'd anywhere else.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
|
|
03-05-2007, 05:31 PM
|
#15
|
|
13 Second Club
Join Date: Aug 2004
Location: Wayne, NJ
Posts: 645
|
billy has a been a friend of mine for quite sometime.
and after seeing this car back now, it is quieter than ever, sounds like nothing at idle, but the car is faster than ever, its amazing.
might be hitting the next auto-x at giants stadium together or the track next weekend which ever comes first for those who care to join and see the car in action and my lt1 attempting to keep up lol.
all though i keep telling him that someday my little lt1 will bet him in the quarter, someday...lol
__________________
-Nick
2002 Chevrolet Camaro SS M6
2013 Subaru XV Crosstrek M5 (The Daily)
1996 Chevrolet Camaro Z28 M6 -SOLD-
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
