| 
| 
	
		|  |  
	
	
		
	
	
	
		|  10-23-2007, 04:15 PM | #1 |  
	| Resident Camera Guy   
				 
                                        
				Join Date: Aug 2004 Location: North Jersey 
					Posts: 10,971
				 | 
				
				Winter Lighting Ideas
			 
 
			
			Before winter comes and I park the car in the garage I've been thinking of some projects to do while I'm free. Here are some of my ideas broken down. What do you guys think? This isn't my daily driver anymore & I love going to car shows & I want to keep it separate from the pack.  
For the interior I plan on replacing all of the interior bulbs with white LED's.  
-White Map Light 
-White Trunk Light 
-White Gages 
-White HVAC  
-White Door Lighting
 
For the exterior of the car I would like to also replace as many bulbs with  
LED's. 
-I don't have fog lights 
-SS Spoiler alread has red LED's 
-Brake Lights (Since my tail lights will be tinted) 
-Red Rear Side Marker (tinted)  
-Yellow Front Side Marker (black clear housing) 
-New Head-Light housings with Halogen Conversions. 
 
Now for the main piece that I need some opinions on; when I purchase new headlight housings and with the glass separated I was thinking of making HALO "Angel Eyes" in my head lights. 
 
Currently my cut-out is wired into my parking lights. So when I hit my parking lights it sends power to the cut out. Now if I wire the Halos the same way, they will come on when my car is "Armed". I think this would catch a lot of cool attention and just look awesome in pictures.
 
 Heres some examples (I no longer have this hood) 
4-Eyed:
   
Outer:
   
Inner:
   
Halfs:
   
I personally like the rings on the outside.
 
Tell me what you guys think, leave me some feed back, or if you have any info regarding these set ups let me know!
		
				__________________  
				 Last edited by ar0ck; 10-23-2007 at 04:21 PM.
 |  
	|   |   |  
	
		
	
	
	
		|  10-23-2007, 06:22 PM | #2 |  
	| Co-Founder / Site Admin 
				 
                                        
				Join Date: Jul 2004 Location: Ewing, NJ 
					Posts: 22,476
				 | 
			
			LEDs are a great choice - they light up faster, and they are brighter. Make sure you don't cheap out when buying them - get ones that project light in all different directions, so the light will fill the housing. 
 Also, you will prolly need to make a small mod to keep your blinkers from flashing like crazy when you swap to LEDs. Do 4th gen blinkers speed up when you have a light out? If so, this is because of the lack of resistance. With LEDs, you'll get the same effect. They sell a resistor that you can wire inline with the blinkers, or you can take apart and modify your stock flasher so that it won't "warn" you when a light is out.
 
 As far as headlights go, what housings/bulbs were you planning on getting?
 
 - Justin
 
				__________________1999 Camry  - Beigemobile DD
2002 Suburban  - Wife's DD
2004 Grand Cherokee  - Not running / Project / Selling?
   |  
	|   |   |  
	
		
	
	
	
		|  10-23-2007, 06:39 PM | #3 |  
	| 11 second club / Moderator 
				 
                                        
				Join Date: Aug 2004 Location: West Berlin, NJ 
					Posts: 7,148
				     
                                    
                                 | 
			
			To go along with what justin said:
 If you're drive and come up to a crotch rocket that has super-hyper-mega-turbo blinkers.  Usually is cause they put led blinkers in and didn't put a in-line resistor in.
 
 im not a halo fan really, but if your going to do it .. do all 4 IMO
 
				__________________2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57
 
 1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
 |  
	|   |   |  
	
		
	
	
	
		|  10-23-2007, 07:04 PM | #4 |  
	| Resident Camera Guy   
				 
                                        
				Join Date: Aug 2004 Location: North Jersey 
					Posts: 10,971
				 | 
			
			
	Quote: 
	
		| 
					Originally Posted by deadtrend1  To go along with what justin said:
 If you're drive and come up to a crotch rocket that has super-hyper-mega-turbo blinkers.  Usually is cause they put led blinkers in and didn't put a in-line resistor in.
 
 im not a halo fan really, but if your going to do it .. do all 4 IMO
 |  After discussing some options with Justin what I think I'm going to do is a Sylvania 9003-6 Head Light Bulb in a set of Sylvania housings that I will crack out the old bulbs from. Then with my older pair of head lights I'm going to try the HALO's. 
 
I think but I'm not sure the LED Replacement bulbs I'm looking at are just direct replacements.
		 
				__________________   |  
	|   |   |  
	
		
	
	
	
		|  10-23-2007, 07:04 PM | #5 |  
	| 
				 
                                        
				Join Date: Sep 2004 Location: Haledon, NJ 
					Posts: 5,162
				     
                                    
                                 | 
			
			if you're going to do halo's, do all 4; I found an article a while back how to make them...very interesting.
		 
				__________________1989 IROC-Z 355 LT1 T56 Swapped
 2016 Chevy Colorado LT 3.6 v6
 2008 Jeep Grand Cherokee Laredo 4.7L RIP 12/29/2016
 1998 Honda CBR 600F3
 2003 Yamaha FX140
 |  
	|   |   |  
	
		
	
	
	
		|  10-23-2007, 11:40 PM | #6 |  
	| 12 Second Club 
				 
                                        
				Join Date: Aug 2004 Location: West Milford 
					Posts: 8,373
				     
                                    
                                 | 
			
			i did LED's in the front of my 88, they wouldnt blink at all until i switched the blinker relay with the hazards relay, go figure?? on the 91, same thing lol
		 
				__________________88 Camaro
 95 Impala SS
 97 Trans Am WS6
 98 Blazer ZR2
 00 Corvette
 04 CTS-V
 04 Grand Cherokee
 06 GMC Sierra
 07 Sublime Charger Daytona
 12 Tahoe LT
 17 Malibu LT
 |  
	|   |   |  
	
		
	
	
	
		|  10-24-2007, 12:55 AM | #7 |  
	| Co-Founder / Site Admin 
				 
                                        
				Join Date: Jul 2004 Location: Ewing, NJ 
					Posts: 22,476
				 | 
			
			
	Quote: 
	
		| 
					Originally Posted by maroman88  i did LED's in the front of my 88, they wouldnt blink at all until i switched the blinker relay with the hazards relay, go figure?? on the 91, same thing lol |  That's because of the lack of resistance in LED compared to regular bulbs....
 
 - Justin
		 
				__________________1999 Camry  - Beigemobile DD
2002 Suburban  - Wife's DD
2004 Grand Cherokee  - Not running / Project / Selling?
   |  
	|   |   |  
	
		
	
	
	
		|  10-24-2007, 09:36 AM | #8 |  
	| BadMod 
				 
                                        
				Join Date: Aug 2004 Location: hamilton, nj 
					Posts: 8,889
				     
                                    
                                 | 
			
			you can make them with clear medical flex tube, and a couple led's
		 
				__________________So much stupid, so little time. 
	Mercerville MotorSports, LLCQuote: 
	
		| 
					Originally Posted by 79CamaroDiva  It started before I drove your car. I just have to look at it the wrong way and your car poops parts. |  |  
	|   |   |  
	
		
	
	
	
		|  10-24-2007, 11:49 AM | #9 |  
	| 
				 
                                        
				Join Date: Sep 2004 Location: Haledon, NJ 
					Posts: 5,162
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by cbrrmike  you can make them with clear medical flex tube, and a couple led's |  exactly, you have to cut slices close together along the tube so the light escapes and gives the halo effect
		 
				__________________1989 IROC-Z 355 LT1 T56 Swapped
 2016 Chevy Colorado LT 3.6 v6
 2008 Jeep Grand Cherokee Laredo 4.7L RIP 12/29/2016
 1998 Honda CBR 600F3
 2003 Yamaha FX140
 |  
	|   |   |  
	
		
	
	
	
		|  10-24-2007, 02:00 PM | #10 |  
	| 
				 
                                        
				Join Date: Sep 2007 Location: Poconos, PA 
					Posts: 606
				     
                                    
                                 | 
				
				interior bulbs?
			 
 
			
			can you get leds for interior bulbs as direct replacements (meaning no mods just pop em in)? if so , where? id love to swap all teh bulbs out to green for my interior...the few it has as its a vert lol
		 
				__________________'96 Z28 Vert M6 - UMI LCA's,UMI SFC's,BMR Panhard rod(soon to be UMI),UMI Short Shifter,Custom clutch, SLP CAI, SLP Strut Brace, Skip Shift Elim, MagnaFlow Catback,160 stat, Tb bypass, Air Foil ,prothane motor mounts & tranny mount, Stainless Radiator Shroud, Hooker headers with magnaflow hiflo cats, brand spanking new tranny, Umi torque arm , C5 brakes all 4 corners .
 
 Soon to come... New paint , and glass .
 |  
	|   |   |  
	
		
	
	
	
		|  10-24-2007, 05:03 PM | #11 |  
	| 
				 
                                        
				Join Date: Jan 2005 Location: Edison 
					Posts: 2,363
				     
                                    
                                 | 
			
			
	http://autolumination.com/Quote: 
	
		| 
					Originally Posted by nj96z28  can you get leds for interior bulbs as direct replacements (meaning no mods just pop em in)? if so , where? id love to swap all teh bulbs out to green for my interior...the few it has as its a vert lol |  
				__________________ 
				RIP Buddy List-January 06 - May 06     YOU WILL BE MISSED!! 
OG bitches!  -insomniac crew- - 1000+ club- 
F the plane member 
Charter Member of the Spin `Em Club    01 SS  -sold and misssed-
06 R6  -sold and DEEPLY missed-
02 WS6  -time for your punishment-   08 R6  -        |  
	|   |   |  
	
		
	
	
	
		|  10-24-2007, 07:01 PM | #12 |  
	| 
				 
                                        
				Join Date: Sep 2007 Location: Poconos, PA 
					Posts: 606
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by oh one ls1 SS   |  found that site a bt confusing, liked http://www.superbrightleds.com/mini-wedge.html  better
		 
				__________________'96 Z28 Vert M6 - UMI LCA's,UMI SFC's,BMR Panhard rod(soon to be UMI),UMI Short Shifter,Custom clutch, SLP CAI, SLP Strut Brace, Skip Shift Elim, MagnaFlow Catback,160 stat, Tb bypass, Air Foil ,prothane motor mounts & tranny mount, Stainless Radiator Shroud, Hooker headers with magnaflow hiflo cats, brand spanking new tranny, Umi torque arm , C5 brakes all 4 corners .
 
 Soon to come... New paint , and glass .
 
				 Last edited by nj96z28; 10-24-2007 at 07:01 PM.
 |  
	|   |   |  
	
		
 
  
	
	
	
	
	| 
	|  Posting Rules |  
	| 
		
		You may not post new threads You may not post replies You may not post attachments You may not edit your posts 
 HTML code is Off 
 |  |  |  | 
 |  |