headliner for 3rd gen needed.

[t0rtur3d]

I am looking for a gray carpet for my 89 trans am. I dont really care if there are any minor stains like rust or oil. I just need a replacement for what isnt there. As long as there isn't and major rips, or burns.

I am willing to pick it up if it is local, if not i will pay shipping plus the cost of the carpet. P.M. me with a price or whatever.

If there is some rips and not chunks taken out of the carpet, it would work for me. Either way the carpet will be steam cleaned and repaired as good as possible before install. the under insulation is'nt needed, just the carpet.

[Jersey Mike]

I have one out of 95 you can have for cheap. I've never owned a 3rd gen, but have heard people swap some 4th-gen stuff into them. The carpet isn't an direct swap, and will require some trimming to fit. But if you want it for cheap & local, I got it laying around.
Again, this is all from what I've heard. I suggest you do your due-diligence before taking a $40 gamble and committing to cutting.

[t0rtur3d]

I will take it, I heard it isnt really that hard to get it to fit. Mostly need a heat gun to mold the passanger side witht he dip. I will have the money next friday for sure. I am trying to get more parts together so I have somehting to do over the weekend.

[t0rtur3d]

Is it the carpet out of the one you are rebuilding?

[Jersey Mike]

It's out of the '95, the one with the "Dark Gray Interior." It will come with the underside insulation. Come by and check it out first if you'd like--condition, color, size, whatever.

If you'd like me to hold it for you, PM me and we'll figure out the remaining logistics.

[greenformula92]

It will fit. Just need to some triming here and there. 4th gen seats are bolt in and the console fits too

[ted gerlach]

i have the correct gray its in a car but no trouble to take out i am converting the car to black,

[t0rtur3d]

Thank you, I received one already.

[t0rtur3d]

The only thing i need now is a head liner.

[1320B4U]

Just buy new from abs...best fit and finish. If your cardboard backing is good, you can get speaker box carpet and just recover it yourself..cheap and effective. I used 3m spray on glue for my old s10 and looked fantastic. Buying used may be a gamble...backing could be shot and the uninstall/reinstall swap could facilitate it f'ing up quickly in the near future.

[Jersey Mike]

Getting 2-3 yards of fabric (hell, even a microsuede) would run under $20 at Michaels and the like. 2 cans of Super77, a heat gun, and 2 hours time and you have yourself a new headliner. This all depends on if you already have a backing, though. If you need a hand one weekend when you're in town, feel free to let me know. I've done a few before and they're pretty painless.

*edit*
Also, I spoke with Mark earlier and he'll be by today. He got swamped the other day, and then our schedules didn't coordinate thereafter. Just wanted to update you and let you know we didn't forget.

[t0rtur3d]

i ripped out the backing cause it was falling apart.

[t0rtur3d]

I was thinking of fiberglassing my own backing. I have tons of foam and other material to make the mold.