 |
02-05-2006, 12:07 PM
|
#1
|
Join Date: Aug 2005
Location: Millville & Little ferry New Jersey
Posts: 454
|
Stock 02 Z28 EXHAUST FREE to who ever needs it
Hey guys I'm doing some early spring cleaning and before i throw stuff out i figure i'd might as well see if someone needs it or wants it
Anyways if any of you guys needs a muffler or tips
Its a Stock Z28 Muffler dual outs and stock retangle tips the tips still welded to the muffler, but it was cut out at the at the front of the axle so it still should be workable in a system for somebody
So if you can get to Millville or are near by just let me know if you want it or can use it
__________________
2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E.
QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn.
Cartek Tuned...
|
|
|
|
02-05-2006, 04:05 PM
|
#2
|
Join Date: Nov 2004
Posts: 3,530
|
I might be able to take it off your hands.
|
|
|
|
|
02-05-2006, 06:01 PM
|
#3
|
Join Date: Aug 2005
Location: Millville & Little ferry New Jersey
Posts: 454
|
if you want it let me know , i still have that and the I pipe except like i said to remove the stock exhaust i had to cut it right in front of the axle towards the front of the car but its free so if you want it or need it or know somebody that needs just let me know if not i'm just going to throw it out in a week or so to free up some room.
__________________
2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E.
QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn.
Cartek Tuned...
|
|
|
|
|
02-05-2006, 06:05 PM
|
#4
|
|
Resident Camera Guy
Join Date: Aug 2004
Location: North Jersey
Posts: 10,971
|
Im interested in One exhaust tip! let me know if you can make that happen.
__________________
|
|
|
|
|
02-05-2006, 07:55 PM
|
#5
|
Join Date: Aug 2005
Location: Millville & Little ferry New Jersey
Posts: 454
|
the 98-02"s are different than your 93-97's the tips are welded to the muffler pipes unlike your year where they slide on then have a screw that locks it to the pipe just so you know, so it wont just slip fit to your system unless you cut it off the pipe
__________________
2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E.
QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn.
Cartek Tuned...
|
|
|
|
|
02-05-2006, 08:02 PM
|
#6
|
|
Resident Camera Guy
Join Date: Aug 2004
Location: North Jersey
Posts: 10,971
|
Its not going on my actual exhaust, as long as its one of those rectangle ones I'll take what I can get. Its for another exhaust.
__________________
|
|
|
|
|
02-05-2006, 08:11 PM
|
#7
|
Join Date: Aug 2005
Location: Millville & Little ferry New Jersey
Posts: 454
|
Yeah its the single in dual out with retangle tips
__________________
2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E.
QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn.
Cartek Tuned...
|
|
|
|
|
02-05-2006, 10:31 PM
|
#8
|
Join Date: Oct 2005
Location: Moorestown
Posts: 66
|
Hey I would def take it. As I would need it if anything ever happened to mine.
I have a warranty but stupid me threw it out. Just looking for one to keep in my basement
Last edited by Tru2Chevy; 02-06-2006 at 09:07 AM.
|
|
|
|
|
02-06-2006, 12:17 AM
|
#9
|
Join Date: Aug 2005
Location: Millville & Little ferry New Jersey
Posts: 454
|
Who ever wants it will have to come to Millville and get it because i wont put it in my car. but anyways Camaro2you has 1st chances since he chimmed in 1st then if he doesnt want it Transam4life has 2nd chance then if he doesnt want it. it's all yours z28c4maro82z so guys please make arrangements or contact me about picking it up
__________________
2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E.
QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn.
Cartek Tuned...
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
