 |
02-03-2006, 03:16 PM
|
#1
|
Join Date: Jan 2006
Location: philly boy
Posts: 54
|
need parts for swap.....
look guys like i said b4 i bought a 350 to swap into my 87 iroc and im makeing it carb cause i hate the computer. and these are the parts i need and i looked around got these prices. i wanted to know if anyone could get them any cheaper....here gos,
1) msd distributer, coil blaster, 6a box= (used) $200 (ebay)
2) new water pump= $50 (ebay)
3)pressure regulater= $40 (speed shop)
4) 8.8mm wires= $50 (ebay)
5) 650 edelbrock carb= $350 (speedshop)
6) a flex fan= $20 (ebay)
if use know where i can get these items cheaper please help me out thank you very much, Frank Sanford
|
|
|
|
02-03-2006, 10:35 PM
|
#2
|
|
Stalker
Join Date: Aug 2004
Posts: 12,083
|
The MSD setup for 200 is a good deal. Those parts list new for around $450.
Summit Racing has many good parts at reasonable prices. I would trust summit brand parts way more than the no-name brand parts on ebay. Here are some parts summit has and a range of prices...
water pump--- short $55(part#SUM-311005) or long-$59.95(SUM-311006)
pressure regulator--- $29.95(SUM-G3131)
wires--- large name brand selection $50-up
Holley 650cfm carb--- $327.88 (HLY-0-4777C)
flex fan, flew-a-lite brand or Summit--- $16.88-$29.95 depending on model and size.
|
|
|
|
|
02-03-2006, 10:44 PM
|
#3
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,170
|
Why do you need a water pump for a v8 to v8 swap? Or wires? Or a fan?
I got a flex fan for you $20 shipped.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
02-03-2006, 11:06 PM
|
#4
|
|
Stalker
Join Date: Aug 2004
Posts: 12,083
|
If hes getting rid of the computer, the electric fans wont work. and if hes going to a v belt setup, the serpentine water pump wont work since its reverse flow. I think the wires may just be an upgrade, unless the MSD distributor has different ends than the stock distributor. Even if its the same, if i did a motor swap, id probably change them too just for the hell of it.
|
|
|
|
|
02-03-2006, 11:18 PM
|
#5
|
|
10 Second Club
Join Date: Aug 2005
Location: lake hopatcong
Posts: 331
|
pulley setup and fans are usable for the swap. done it three times before. any questions pm me...
|
|
|
|
|
02-03-2006, 11:18 PM
|
#6
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,170
|
Quote:
|
Originally Posted by SmokingSS
If hes getting rid of the computer, the electric fans wont work. and if hes going to a v belt setup, the serpentine water pump wont work since its reverse flow. I think the wires may just be an upgrade, unless the MSD distributor has different ends than the stock distributor. Even if its the same, if i did a motor swap, id probably change them too just for the hell of it.
|
Ok, you can have fans with no computer. Its a switch & a relay, just like GM did. And why swap accessory setups at all? Leave what came in the car or use the whole donor setup. A SBC is a SBC.
Looking at his thread, I'm guessing he is trying to save money here so I am wondering out loud why he needs some of this stuff. And the electric fans are free HP and making them work will cost no more than a fan & shroud will set him back. I did assume his old wires are beat too, but since I see these other things that do not need to go, I thought I'd ask about them too.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
02-03-2006, 11:24 PM
|
#7
|
|
Stalker
Join Date: Aug 2004
Posts: 12,083
|
Quote:
|
Originally Posted by BonzoHansen
Ok, you can have fans with no computer. Its a switch & a relay, just like GM did. And why swap accessory setups at all? Leave what came in the car or use the whole donor setup. A SBC is a SBC.
Looking at his thread, I'm guessing he is trying to save money here so I am wondering out loud why he needs some of this stuff. And the electric fans are free HP and making them work will cost no more than a fan & shroud will set him back. I did assume his old wires are beat too, but since I see these other things that do not need to go, I thought I'd ask about them too.
|
i agree with you 100%, i had my carb'd 383 with serpetine belt drive and electric fans. You are actually thinking into his post, lol, i just gave him the answers he wanted. But yes, he can save more by keeping the current accesories and fan.
|
|
|
|
|
02-03-2006, 11:26 PM
|
#8
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,170
|
Quote:
|
Originally Posted by SmokingSS
i agree with you 100%, i had my carb'd 383 with serpetine belt drive and electric fans. You are actually thinking into his post, lol, i just gave him the answers he wanted. But yes, he can save more by keeping the current accesories and fan.
|
That is my problem, I think too much late at night. 
My 77 will have a serp setup & electric fans by summer. 
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
