fs engine parts

[project89]

trans/converter
rebuilt 89 700r4 trans to that list approx 20,000 miles since rebuild and 600 miles since the install of b&m shiftkit
and b&m holeshot 2400 converter for 700r4 2,300-2,500 stall
p/n bmm-70419 also has 600 miles on it


t-tops from an 87 iroc with key
http://img86.imageshack.us/my.php?image=ttops5ax.gif


taillights form 87 iroc



power side harness from 87 tpi car




4 wheel disc brake master and prop valve


misc relays


4 bolt block bored and honed .030 over cleaned preped and painted black
will get pics
cast crank for above block perfect not cut under
ported 882 heads
moroso elc water pump
edelbrock perfomer airgap installed but for less then 500 miles
misc flywheels
new rocker set
sbc rods arp wavelock bolt new
edelbrock 650 elc choke slightly used ( i believe have to dbl check)
2 hei dizzys

will get pics of all the above

taking offers on everything
have more stuuff but need to sort threw it all to get list and pics

[hardline_42]

Price and pics on the 700r4 and TC. Was it rebuilt to stock or for higher horse power applications?

[project89]

id have to say stock rebuild,it was done before i bought the car,pulled it caus ethe motor spun a rod ,it does work perfect though,B&m shiftkit which i installed ill get pics tommorow when i get to work

[hardline_42]

I have a stock 700r4 now that I'm rebuilding. Thought yours might save me the trouble. How about the Holeshot? How much?

[project89]

275 and its urs

[camaro2you]

how much for the master/prop.? thanks

[project89]

50 bucks

[project89]

ok_took_pics_of_everything_today_ill_post_them_soo n_as_i_get_out_of_work


p.s___sorry_about_the_typing_spaceBar_is_busted

[project89]

alright i took pics of alot of stuff
the heads need to be finished being ported, if somone buys them i will finish them. also added a set of headers, cant rember what brand they are, but they are either hooker or headman headers, pics of all my stuff can be found here
http://69.141.100.240/stuff4sale

[wrong generation]

pm sent

[project89]

sorry didnt relize i had a pm.. replied

[project89]

anyone got a turbocharger to trade for some stuff, was rebuilding mine today and it seems the turbine shaft is bent

[project89]

if any of u guys that are attending dyno day are interested in any of this stuff or deff want anything let me know, and ill bring the stuff with me.well witht he exception of the block or slicks/rims cause they wont fit in the car

[project89]

i know somone needs this stuff

Manifold pending sale*




















make me offers everything must go

[camaro2you]

how much for the block?

[project89]

just make me an offer on it, im not really sure what the stuff is worth so, alls i know is how much i have in it,block cost+machine work.only thing that needs to be done is it needs a cleaning,its ben sitting for almost a year now,but ive kept all the surfaces sprayed down with wd-40

[project89]

willing to trade everything i have(have more then listed) for a 87-92 "V6" camaro no birds considered,speed density cars a ++,willing to do stright up trade.trade/cash
short run down of parts
2 weldrims/w new slicks
trans/converter 700r4 ( rebuilt with shiftkit and 2,400 rpm verter
2 flewplates
2 hei dizzys
tri pillar
ported 882 heads(outflow l98 heads stock form)
new rods/w arp wavelock bolts
4 bolt main .030 over/fresh machine job/painte dblack
new 1.5 rockers and pivot balls
2 sets of pushrods
3rd gen hooker headers new
1 3rdgen v8 radiator
1 morosso elcetric water pump
1 set iroc tail lights
1 set t-tops for 3rdgen(perfect with key to lock them
1 power side harness for tpi car mint
1 master/prop valve for 4 wheeldisk car
1 used set of 3:42 gears gm gears perfect
1 new edlbrock air gap manifold
1 eldelbrock 650 carb
+ more

[project89]

got my rs back so no longer interested in trades/partial trades,stuff is still for sale though