 |
12-13-2007, 02:20 PM
|
#1
|
Join Date: Jun 2006
Location: Point Pleasant, N.J.
Posts: 122
|
11 second malibus
I was wondering if anyone knows of a g-body car that runs 11's with a full interior and a n/a 350 b/c I have a friend who has a 80's G-body malibu that he's building and he's aiming for low 11's maybe 10's. He's trying to do this with a 350 that will be n/a and he'll have 4.11 gears and a full interior and he says it could be a daily driver. I'm not sure this can be done but he swears there's alot of g-bodies doing exactly what he wants his to do with the same set-up. Can someone give me an example of a G-body that runs 11's so I know what it takes to get those times.
|
|
|
|
12-13-2007, 05:20 PM
|
#2
|
|
NJFBOA Co-Founder
Join Date: Jul 2004
Location: All up in your kool aid!
Posts: 12,235
|
you jsut described a lot of the 11 second cars out there. a healthy small block, some suspension bolt ons, and a good set of gears. they are a solid platform for racing, so you don't have to waste a bunch of time looking for super double secret formulas.
don't forget the safety equipment if he is planning ot go quicker than 11.50
|
|
|
|
|
12-14-2007, 06:10 PM
|
#3
|
Join Date: Feb 2005
Location: Little Egg Harbor NJ
Posts: 1,175
|
__________________
2011 Camaro 1SS Cyber Grey Metallic
2005 Silverado
|
|
|
|
|
12-14-2007, 08:11 PM
|
#4
|
|
13 Second Club
Join Date: Jul 2004
Location: Ewing/Galloway, NJ
Posts: 3,904
|
go to atco one night...youll see tons of g-bodies in the 10's... 10 second G + street stuff = 11 second street g 
__________________
EB
99 Riviera, Bone stock, 14.34 @ 96 "Walking 5.0's in luxury" RIP
95 Cherokee, Bone stock 16.2 @ 83 "Treeing your 3rd gen and beating it to the line despite trapping less....and looking better"
93 TA, Bone stock, 13.8 @ 100 "Beating ****** drivers in ****** LS1's"
https://www.facebook.com/groups/285090241699967/
R.I.P. Tia 
|
|
|
|
|
12-15-2007, 07:53 AM
|
#5
|
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
At full weight that little 350 is going to have to put out 535 hp at the wheels.. I hope he is not trying to run this n/a on pump gas!
I have a few customers with G bodies in the 11's/10's, they are great drag cars.
__________________
JSSPEEDANDCUSTOM.COM
|
|
|
|
|
12-15-2007, 07:55 AM
|
#6
|
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
Daily driving a 3600 lb 10 second n/a car????
Must have deep pockets or a high B.A.L.
__________________
JSSPEEDANDCUSTOM.COM
Last edited by JSPERFORMANCE; 12-15-2007 at 07:55 AM.
|
|
|
|
|
12-16-2007, 10:26 PM
|
#7
|
Join Date: Jun 2006
Location: Point Pleasant, N.J.
Posts: 122
|
Quote:
Originally Posted by JSPERFORMANCE
At full weight that little 350 is going to have to put out 535 hp at the wheels.. I hope he is not trying to run this n/a on pump gas!
I have a few customers with G bodies in the 11's/10's, they are great drag cars.
|
You understand what I mean. He intends on having a mildly built 350 in a full weight car thats naturally aspirated and is a daily driver and will run on 93 octane.I don't think it's going to happen....
|
|
|
|
|
12-16-2007, 10:29 PM
|
#8
|
Join Date: Jun 2006
Location: Point Pleasant, N.J.
Posts: 122
|
Quote:
Originally Posted by Squirrel
go to atco one night...youll see tons of g-bodies in the 10's... 10 second G + street stuff = 11 second street g |
I've seen alot of fast g-bodies at the track already, I know they run those times
but I'm asking what it takes to run those times. My friend thinks his heads and cam 350 thats running on 93 octane in a full weight car is going to run those same times, and i just don't see it happening.
|
|
|
|
|
12-16-2007, 10:56 PM
|
#9
|
|
13 Second Club
Join Date: Jul 2004
Location: Ewing/Galloway, NJ
Posts: 3,904
|
Quote:
Originally Posted by SpeedMetalT/A
I've seen alot of fast g-bodies at the track already, I know they run those times
but I'm asking what it takes to run those times. My friend thinks his heads and cam 350 thats running on 93 octane in a full weight car is going to run those same times, and i just don't see it happening.
|
it can be done, just depends on how efficient the engine is...look what kind of times daily driver full weight HCI lsx cars are running
__________________
EB
99 Riviera, Bone stock, 14.34 @ 96 "Walking 5.0's in luxury" RIP
95 Cherokee, Bone stock 16.2 @ 83 "Treeing your 3rd gen and beating it to the line despite trapping less....and looking better"
93 TA, Bone stock, 13.8 @ 100 "Beating ****** drivers in ****** LS1's"
https://www.facebook.com/groups/285090241699967/
R.I.P. Tia
|
|
|
|
|
12-16-2007, 11:22 PM
|
#10
|
Join Date: Aug 2004
Location: North Jersey
Posts: 3,047
|
Quote:
Originally Posted by SpeedMetalT/A
You understand what I mean. He intends on having a mildly built 350 in a full weight car thats naturally aspirated and is a daily driver and will run on 93 octane.I don't think it's going to happen....
|
I think high 12's are doable on a full-weight G-body with around 350 ci, and a streetable cam/compression ratio. I don't see a daily driver, 3600lb. G-body getting into the low 11's/high 10's on just 350 cubes. My buddy's Monte is relatively streetable; he's got a well-built 383 and a 700R4 with 4.10s out back, and runs 10.50s with a 200 shot of juice. His car has a full interior and cage, just the A/C box and stuff has been taken out. But, his car certainly wasn't cheap to build either; not sure what kind of budget your friend is planning for his car.
__________________
Seeya,
Steve R. in North Jersey
'16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car!
Former Toy - '88 Monte SS - had lots of mods...
|
|
|
|
|
12-17-2007, 07:04 AM
|
#11
|
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
Like I stated before, it will take 535 rwhp to make that car go 10.0. Making that kind of power on pump gas in a car that will be driven every day is not impossible but very, very expensive and will require some exotic parts and engine work. The car will devour valve springs, gasoline, tires, and just about every other part on the car.
Heads and cam on a stock short block is not gonna do it..
Nitrous might make it possible though 
__________________
JSSPEEDANDCUSTOM.COM
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
