Weld ProStars 15x8" chevy pattern 4.75x5

[badzracing]

15 x 8 , 3.5 back space 4-3/4 bolt circle
no center caps , no tires
with 1/2" open lugnuts

Good shape....could use a polishing

$375 shipped to the lower 48.... paypal prefered... no need to add 3%

$350 picked up...located in pemberton, nj...will meet within a reasonable distance

[Savage_Messiah]

No drill holes or anything, right?

edit: nevermind... that's not the backspacing I want for a 4th gen, is it

[deadtrend1]

Originally Posted by Savage_Messiah

No drill holes or anything, right?

edit: nevermind... that's not the backspacing I want for a 4th gen, is it

yes, you just need to run 5/16 spacers and "should" run longer studs in the front

Edit ... read here... http://www.camaroz28.com/forums/show...08&postcount=2

[Savage_Messiah]

Originally Posted by badzracing

15 x 8 , 3.5 back space

Originally Posted by deadtrend1

yes, you just need to run 5/16 spacers and "should" run longer studs in the front

Edit ... read here... http://www.camaroz28.com/forums/show...08&postcount=2

Originally Posted by Injuneer

REAR:

In the back, you will want to use either:

-15x8” 5.5” backspace

3.5 vs 5.5

[badzracing]

No drill holes....they came of 1980 Malibu so as far as backspacing is concerned for an f-body, I'm not sure.