 |
|
12-25-2007, 08:31 PM
|
#1
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
Moving sale - everything must go - new parts added!!
Closing date is Feb 1 for the new house.... I don't want to have to move the car also.
NO reasonable offers will be turned down.
New parts added in last post!!!!
I DO NOT want to take these parts and pack them up.... it would be MUCH easier to sell them.
1) 10 lb NOS nitrous oxide bottle which is full.
$140 OBO SOLD
2) BF Goodrich Drag radials 255 50 16's mounted on camaro 16 X 8 salad shooter wheels.
The wheels are the lightest of the oem f body wheels. The drag radials have zero tred on them but decent life left in them. If you are familiar with drag radials then you know bf goodrich drag radials get better and better regarding traction when there is less and less tread. Mounted and balenced.
$80 for the 2 wheels and tires OBO
3) Mickey thompson "et streets" 26 X 10.5 X 16 mounted on 16 X 8 salad shooter camaro wheels
The et streets have a maximum of 20 passes.... most... if not all... were N/A so the burn outs were small
The tires go for $160 each
Again, wheels are salad shooters so they are the lightest oem wheel.
$200 OBO! SOLD
4) SLP cold air kit for 3.8 v6 f body - it is just the metal intake tubing - no air filters. Make an offer
5) 3:23 gears
$40 OBO
6) Pick ANY part off my v6 race car and make an offer. A majority of people are familiar with this car..... tell me what you want... if I have it... it is yours.
Some parts off the top of my head:
PA Racing mild steel drag k member
PA Racing mild steel lower a arms
RK Sport tubular sub frame connectors
Lingenfelter supertube intake
Sparco Evo Race seat (cost $550 brand new)
Steel braided brade lines
Ported intake (upper and lower)
Ported heads
SLP 1.8 roller rockers, titanium retainers and springs
RK Sport headers
3 inch high flow cat (catco) PENDING SALE
TNT nitrous system (wet kit)
Walbro 255 LPH in tank fuel pump
4:10 gears with a POWERTRAX locker diff
Build tranny with 4200 stall nitrous converter
And MANY more parts.
If the car goes to the new house then once it arrives I will take a couple parts off it and then it goes to the junkyard.
I DO NOT intend on drag racing my trans am ANYWHERE near what I did with the v6 so I DO NOT plan on using ANY of these parts.
Thank you.
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
Last edited by 12secondv6; 12-30-2007 at 10:41 AM.
|
|
|
12-26-2007, 12:06 AM
|
#2
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
pending sale on the car.
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
|
|
|
12-26-2007, 04:56 PM
|
#3
|
11 second club / Moderator
Join Date: Aug 2004
Location: West Berlin, NJ
Posts: 7,148
|
wow that was quick to sell the whole car
__________________
2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57
1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
|
|
|
12-26-2007, 06:00 PM
|
#4
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
Quote:
Originally Posted by deadtrend1
wow that was quick to sell the whole car
|
I recieved a PM within 6 minutes of posting it on the v6 site I am mostly on.
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
|
|
|
12-26-2007, 06:37 PM
|
#5
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
Pending sale on et streets.
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
|
|
|
12-27-2007, 10:12 AM
|
#6
|
Join Date: Nov 2005
Location: Edison
Posts: 7,856
|
How does $120 sound on the nitrous bottle?
__________________
1984 Firebird
2000 Z28
2023 Tacoma
|
|
|
12-27-2007, 12:06 PM
|
#7
|
14 Second Club
Join Date: Feb 2007
Location: New Milford
Posts: 650
|
want that nos tank, where are you in nj
__________________
FAA Airframe and Powerplant Mechanic - Republic Airlines
-1980 Trans Am ZZ383 stroker
-2012 Ford Focus 5spd
-1989 Harley Softail Custom
-2000 Trans Am, M6, WS6 *SOLD* *RIP*
|
|
|
12-27-2007, 12:40 PM
|
#8
|
Join Date: Dec 2005
Location: Boston/North
Posts: 9,214
|
Quote:
Originally Posted by transamkid
want that nos tank, where are you in nj
|
IIRC he's in wayne, nj
http://maps.google.com/maps?q=Wayne,...i=map&ct=title
edit:: james, just so you know the link in your sig is missing the ":" after http
__________________
Quote:
Originally Posted by BonzoHansen
dumbass.
|
Last edited by Knipps; 12-27-2007 at 12:42 PM.
|
|
|
12-27-2007, 11:21 PM
|
#9
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
slicks are sold
car is still available.
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
|
|
|
12-28-2007, 04:48 PM
|
#10
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
Pending sale on nitrous bottle.
I have it in the car...... just tell me when and where.... and I will deliver
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
|
|
|
12-28-2007, 04:49 PM
|
#11
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
Quote:
Originally Posted by Knipps
edit:: james, just so you know the link in your sig is missing the ":" after http
|
Thanks
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
|
|
|
12-29-2007, 11:28 AM
|
#12
|
Join Date: Jan 2006
Location: south carolina/Butler N.J part time
Posts: 450
|
you have pics of the BFG drag radials?
|
|
|
12-29-2007, 12:14 PM
|
#13
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
Quote:
Originally Posted by OneFast383
you have pics of the BFG drag radials?
|
I'll get pictures of them later today and post them.
They cut comfy low 1.7's N/A and if you were not aware, bf drag radials get much better as they are worn in.
Pics to come later today.
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
|
|
|
12-29-2007, 06:30 PM
|
#14
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
Quote:
Originally Posted by OneFast383
you have pics of the BFG drag radials?
|
Here are the pics. Btw, the tires have some dirt on them.
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
|
|
|
12-29-2007, 07:30 PM
|
#15
|
Join Date: Dec 2004
Location: Galloway, NJ
Posts: 3,964
|
hm, so uch for me pickign outa few parts i wanted
__________________
1996 Camaro C/S - 2/3 Corvette Engine
Quote:
Originally Posted by BigAls87Z28
Uh yeah, after they surprized buttsecks us at Pearl Harbor?
|
|
|
|
12-29-2007, 07:36 PM
|
#16
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
Quote:
Originally Posted by Blacdout96
hm, so uch for me pickign outa few parts i wanted
|
What are you looking for?
There is still loads of parts.
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
|
|
|
12-29-2007, 07:37 PM
|
#17
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
Quote:
Originally Posted by WayFast84
How does $120 sound on the nitrous bottle?
|
Nitrous bottle sold - thanks!
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
|
|
|
12-30-2007, 10:37 AM
|
#18
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
More parts added:
F body 2 guage pillar pod.
I ran this for a couple years and a couple years ago I relocated my guages to the A/C vents (I had removed the a/c system so they were useless) so I don't need this.
http://www.bbbracing.com/12secondv6/guagepod.JPG
I think they go for $40-50 new so $20 and it is yours.
Summit racing trunk mount battery box
I put the batteyr in the trunk on both my chevelle and bird.... I do not know if this is all the parts that comes with it but here is a pic:
http://www.bbbracing.com/12secondv6/batterybox.JPG
Summit sells them for $80 new so $40 and it is yours.
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
|
|
|
12-30-2007, 11:00 AM
|
#19
|
Join Date: Jan 2006
Location: south carolina/Butler N.J part time
Posts: 450
|
is there any tread on the BFGs at all or are they bald.... im not trying to dick you around i am really interested but cant see in the pics
|
|
|
12-30-2007, 11:02 AM
|
#20
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
Quote:
Originally Posted by OneFast383
is there any tread on the BFGs at all or are they bald.... im not trying to dick you around i am really interested but cant see in the pics
|
They are bald - no tread.... but that is when they are best.... and still have life left in them... and no, you aren't dicking me around, I would ask the same questions if I was buying them
I want to get rid of them because they are taking up space in my storage lot
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
Last edited by 12secondv6; 12-30-2007 at 11:03 AM.
|
|
|
01-01-2008, 07:23 PM
|
#21
|
Join Date: Sep 2004
Location: Haledon, NJ
Posts: 5,162
|
are the brake lines 93-97 specific or are they 82-02? I know my rear calipers are the same as the early 4th gens..PBR aluminum, but I don't know about the fronts.
__________________
1989 IROC-Z 355 LT1 T56 Swapped
2016 Chevy Colorado LT 3.6 v6
2008 Jeep Grand Cherokee Laredo 4.7L RIP 12/29/2016
1998 Honda CBR 600F3
2003 Yamaha FX140
|
|
|
01-01-2008, 07:43 PM
|
#22
|
15 Second Club
Join Date: Nov 2006
Posts: 390
|
hey boss man do u have a posi rear that will fit a 94 camaro
|
|
|
01-01-2008, 08:00 PM
|
#23
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,476
|
Quote:
Originally Posted by Kid Racer
hey boss man do u have a posi rear that will fit a 94 camaro
|
He's got the rear with 4.10s and a locker that will bolt in to any 93-02.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
01-13-2008, 09:38 PM
|
#24
|
Token v6 Guy
Join Date: Sep 2004
Location: No longer neon land :(
Posts: 5,703
|
Pending sale on car.... if it goes through..... I will be VERY happy due to its destination.
Brake lines - I don't want to remove them until car is in new house - also depends on if car is sold.
Rear - needs to be with car - once moved into new house, if the sale of the entire car falls through then it is available.
__________________
2013 Dodge Challenger SRT8 - 12.079 at 116.45
2010 Ford Taurus SHO - stage 4+ tune and an intake - no times yet
|
|
|
03-11-2008, 11:11 PM
|
#25
|
2007 Member of the Year
Join Date: Oct 2004
Location: Seabrook, TX
Posts: 14,281
|
OMFG how did i not see this thread till now?!
What's the status on the car?
PM IM or call if you want.
Would be interested in a bunch of stuff listed, mostly suspension.
I don't see the qa1s and springs listed... they still on there?
__________________
WF=DF
Kommandant of the ACL (Anti Canadian League)
Quote:
Originally Posted by LTb1ow
Junk the pos, spend the money on beer, acquire headache.
Same result cept this headache doesnt last months.
|
Last edited by Savage_Messiah; 03-12-2008 at 01:38 AM.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|