 |
07-26-2010, 08:11 PM
|
#1
|
Join Date: Nov 2004
Location: Randolph
Posts: 198
|
Coming This Fall: 2001 LS1 Longblock
I scored an LS6 and I'm having it upgraded, this Fall when it goes in the current LS1 longblock will be on the market.
Specs:
2001 Pontiac Trans Am engine
Stock except for cam, valvesprings, oil pump, and timing chain.
Cam is a TR-224 112deg LSA installed by Rapid Motorsports.
Springs are Crane duals, spring dyno tested by Bruce's Speed Shop prior to installation.
Oil pump is a Thunder Racing ported LS6 piece.
Timing chain is a Katech C5R "JWIS" heavy duty chain.
Front and rear main seals were replaced w/ new GM pieces pressed in using dealer J-tools.
The heads and oil pan have never been off the engine. 2001 was the year GM upgraded rod bolt design so no need to open it up.
I don't drag race, just commuting and the occasional road course driving event. Mobil-1 synth oil only. Mileage was 31,xxx when I bought it from Contemporary Corvette, I've added just over 24,600 since then. I have Blackstone Labs oil analysis reports from 2004 and a few other years, will get one from this year prior to removal.
Just selling the basic longblock including front & rear covers, valley cover, valve covers. No oil pan, pickup, intake, accessories, sensors, wiring, balancer, etc.
I have an accurate leakdown tester and compressor in my shop, will post leakdown #s when it's out. Buyer is welcome to re-test.
__________________
1982 Z28 w/ '01 LS1 + T56, TR224 cam, Katech oil pump, JWIS chain
|
|
|
|
07-27-2010, 08:29 PM
|
#2
|
Join Date: Mar 2005
Location: nj
Posts: 248
|
free?
__________________
2018 vw golf r m6
2005 subaru outback m5
1999 camaro ss heads/cam m6
Previous
1999,, 2001, 2002 Chevy camaro ss, 1998 camaro z28, 2013 camaro 1le twin turbo all m6
|
|
|
|
|
07-27-2010, 09:09 PM
|
#3
|
Join Date: Feb 2010
Location: Bucks County PA
Posts: 152
|
How much?
|
|
|
|
|
07-29-2010, 06:46 AM
|
#4
|
Join Date: Nov 2004
Location: Randolph
Posts: 198
|
$1,000 w/ no oil pan, or $1,200 with Vette bat-wing pan.
__________________
1982 Z28 w/ '01 LS1 + T56, TR224 cam, Katech oil pump, JWIS chain
|
|
|
|
|
07-29-2010, 11:46 AM
|
#5
|
|
Stalker
Join Date: Aug 2004
Posts: 12,082
|
for a G ill take it.
i wouldnt need the oil pan or even any of the covers. maybe you could take em off and sell them seperately?
And any better of an idea of time frame?
want a deposit? start payments now?
car still currently being driven?
oh, and ls6 or ls1 block? part number ending with 168 is ls6 block.
also is theres no "pedestal" on the passenger side of the block in front of the head, its an ls6 version.
Last edited by V; 07-29-2010 at 11:53 AM.
|
|
|
|
|
07-29-2010, 01:48 PM
|
#6
|
Join Date: Apr 2010
Location: Browns Mills
Posts: 110
|
If something happens and V can't get it I'll be next. I'll even take JUST the block...
__________________
1987 Trans Am 5.0 (project status)
|
|
|
|
|
07-29-2010, 06:42 PM
|
#7
|
Join Date: Nov 2004
Location: Randolph
Posts: 198
|
Quote:
Originally Posted by V
for a G ill take it.
i wouldnt need the oil pan or even any of the covers. maybe you could take em off and sell them seperately?
And any better of an idea of time frame?
want a deposit? start payments now?
car still currently being driven?
oh, and ls6 or ls1 block? part number ending with 168 is ls6 block.
also is theres no "pedestal" on the passenger side of the block in front of the head, its an ls6 version.
|
Time frame hasn't been nailed down yet, I'm still working with Geoff @ EPS on a cam spec.
I can't see taking a deposit and sitting on anybody's money until the engine is available for sale, at that time first one w/ cash on the barrelhead takes it.
The engine is currently in my car and being driven ~ once/twice per week depending on weather.
And it's an LS1 block.
__________________
1982 Z28 w/ '01 LS1 + T56, TR224 cam, Katech oil pump, JWIS chain
|
|
|
|
|
08-14-2010, 05:31 PM
|
#8
|
Join Date: Nov 2004
Location: Randolph
Posts: 198
|
UPDATE: I'm nixing the project, got accepted into grad school and start right after Labor Day. Between that and work and family it's postponed for at least 2 years.
I'll probably sell the LS6 I was prepping, in short-block-plus form as the heads and lifters already sold. Still has the Vette oil pan on it, bottom end was never opened up. It's out of an '01 Vette, factory built as an LS1 but in an LS6 block. Will post a new ad after I re-plan things.
__________________
1982 Z28 w/ '01 LS1 + T56, TR224 cam, Katech oil pump, JWIS chain
|
|
|
|
|
08-14-2010, 06:33 PM
|
#9
|
|
What?
Join Date: Nov 2009
Posts: 411
|
helloooooooooooooooooooooooooooooo
ill take one, with the oil pan. give me a helllllllllll,yeahhhhhhhhhh,,
__________________
YELLOW BULLET,WHER THE ''WEAK ARE EATEN''
STOP THE ''BITCH IN,  BAAAAD
BOOTS TO ASSSES, IF U CAN SMELLLLLLLLLLLLL,WHAT THUNDER IS-SPAYYYY-IN..  .. RIP, MIKE ROMEO..TUNE,BY DALE CHERRY,INJECTION-CONNECTION..""SHAZAMMMM""
THE FAMOUS ONE215-675-8515 ,AND STEVE SPOHN,and j&g-transmisstions,willow grove,pa,215-659-3022,, R.I.P.JOE PRINCE..
|
|
|
|
|
08-14-2010, 08:15 PM
|
#10
|
Join Date: Nov 2004
Location: Randolph
Posts: 198
|
I am waiting for feedback from Katech and/or ECS on something I saw on the deck surface that I wasn't sure about, if they say it's good to go I'll post an update. Pics are attached in case anyone is familiar with it.
The small gaps between the cylinder liner and the block deck at approximately 12 o'clock are on cylinders 2 and 4, none of the others have them.
Might be nothing, might be a show-stopper and need a trip to the machine shop. I wasn't going to assemble it until I heard back, and I don't want to post it without a conclusive finding.
edit: the cylinder bores are reflecting the carbon off the piston crowns, that's not surface rust...they're still showing factory cross-hatch.
__________________
1982 Z28 w/ '01 LS1 + T56, TR224 cam, Katech oil pump, JWIS chain
Last edited by crainholio; 08-14-2010 at 08:16 PM.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
