Computer geek types, got a question. - Page 2 - NJFBOA - Home of New Jersey's Camaros and Firebirds

Tru2Chevy · 03-23-2006, 03:56 PM

Quote:

Originally Posted by Brando56894

im here im here, looks alright though its micro atx which means its alot smaller then the other boards, which also means that it might not bolt up in your case correctly :-/

Look at the pics he posted, his current board is a micro ATX, so a full ATX board might not fight in his case.

You should prolly check on that.

- Justin

V · 03-23-2006, 03:58 PM

ok, now i got a question, i basically gave up tryign to network my 2 pcs and i dont feel like buyign a new modem just to get my picture files off my old comp...so... im gonna move all the files i want onto 1 hard drive and pull that and put the whole drive into my current computer. Sounds good? i hope so. anyways.

My old comp has 3 hard drives, C, D, and E.
C is the main with a capacity of 1.99GB(385MB free)
D is the secondary with a capacity of 1.52GB(1.44GB free)
E is the last one with a capacity of 494MB(494MB free)
since i wanna keep the comp semifunctional after i yank the hard drive, i wont take C drive... i was thnking of using D. which most of my files are already on. good choice? lol

Once i have all the files moved, and i open the case...how do i knows which drive is which? lol, and once i find it and remove it, how do i install it in my surrent computer? i need some assistance, lol.

Tru2Chevy · 03-23-2006, 04:04 PM

For starters, do you know for sure that there are physically three hard drives inside the computer? It's easy to divide one physical drive so that it acts as many seperate drives.

I would open the computer first and verify the existance of three drives. If there are three, then read the labels on each - most list the size (in MB or GB) of the storage capacity. That will tell you which drive is which. If there are three drives (or two for that matter), then your idea will work fine. Just make sure that you check the jumper settings of ALL of your drives anytime you add or remove a drive from a box. Jumper settings should also be on the label of each drive.

- Justin

V · 03-23-2006, 04:14 PM

haha, see im glad i asked, i opened it and only see 1 Hard drive(POS), shows i never looked, lol. Well anyway, i just moved all the files i wanted to the 1 part of the HD then. Myabe itll be easier to find them later on. Where do the jumper setting come into play? ive never really swapped parts other than modems and game/video cards. I also have another hard drive from the comp i took apart earlier today, is it possible to use that as well, and then truly have 2 or 3 functioning hard drives? i say 2 beacuse once i get the files i need of the one, i wanna put ti back in the old comp to keep it functioning to some extent.

Fozzi58 · 03-23-2006, 06:12 PM

Smokin - did you open the case? Do you have 3 physical drives or 2 or 1?

V · 03-23-2006, 06:16 PM

lol, yeah, theres only 1, how would i go about hooking up to my good comp so i can copy the files i want off it?

turbo96z28 · 03-23-2006, 07:41 PM

Quote:

Originally Posted by Tru2Chevy

Look at the pics he posted, his current board is a micro ATX, so a full ATX board might not fight in his case.

You should prolly check on that.

- Justin

i don't think i'll have a problem now. the new case i got can fit a full ATX board.

Tru2Chevy · 03-23-2006, 07:43 PM

Quote:

Originally Posted by turbo96z28

i don't think i'll have a problem now. the new case i got can fit a full ATX board.

Ahh, I didn't realize that you were getting a new case.

- Justin

turbo96z28 · 03-23-2006, 07:44 PM

Smokin, have you looked into getting an external hard drive?

you can transfer all the files onto that and keep it off to the side til you need them.

Tru2Chevy · 03-23-2006, 07:44 PM

Quote:

Originally Posted by SmokingSS

lol, yeah, theres only 1, how would i go about hooking up to my good comp so i can copy the files i want off it?

I would just take the hard drive out of the old one, drop it in the new one long enough to copy over the pics, and then put it back in the old machine.

This isn't exactly what you are doing, but it will prolly help: http://www.mysuperpc.com/hdu/jumper_pins.shtml

- Justin

turbo96z28 · 03-23-2006, 07:45 PM

Quote:

Originally Posted by Tru2Chevy

Ahh, I didn't realize that you were getting a new case.

- Justin

just picked it up today.

i went to Best Buy for a DVI cable and ended up getting the case

.

it's an Antec SLK2650-BQE with a 350 watt power supply.

Tru2Chevy · 03-23-2006, 07:47 PM

Quote:

Originally Posted by turbo96z28

Smokin, have you looked into getting an external hard drive?

you can transfer all the files onto that and keep it off to the side til you need them.

By the sound of his old computer, I seriously doubt that it has USB 2.0 or Firewire capability. And USB 1.0/1.1 external hard drives are super slow....

- Justin

turbo96z28 · 03-23-2006, 07:51 PM

Quote:

Originally Posted by Tru2Chevy

By the sound of his old computer, I seriously doubt that it has USB 2.0 or Firewire capability. And USB 1.0/1.1 external hard drives are super slow....

- Justin

i copied all my files onto my external before i put my USB 2.0 card in and it took about two hours to copy about 67 gigs worth of files

V · 03-23-2006, 08:09 PM

hmm, ok, seems simple enough, but just to be safe, i tried putting an even older hard drive i pulled form a comp today into my old dell, so far so good, its booting up now. if that goes well and i can grab files of there, then ill fell confident doign the swap into my good comp

turbo96z28 · 03-23-2006, 08:15 PM

may the force be with you Paul.

Tru2Chevy · 03-23-2006, 08:16 PM

Cool beans!

- Justin

Tru2Chevy · 03-23-2006, 08:16 PM

Quote:

Originally Posted by turbo96z28

i copied all my files onto my external before i put my USB 2.0 card in and it took about two hours to copy about 67 gigs worth of files

That's a long time!

- Justin

V · 03-23-2006, 08:19 PM

now im just trying to find the 2nd hard drive...hmmm.. where is it...

turbo96z28 · 03-23-2006, 08:19 PM

Quote:

Originally Posted by Tru2Chevy

That's a long time!

- Justin

i'm only speculating at 2 hours.

i moved all the files into one folder the night before and started the copy when i went to work in the morning at 9ish. my dad checked on it after 11 and it was finished.

V · 03-23-2006, 08:30 PM

how do i get to the BIOS to make sure it recognizes the drive as a slave?

turbo96z28 · 03-23-2006, 08:33 PM

Quote:

Originally Posted by SmokingSS

how do i get to the BIOS to make sure it recognizes the drive as a slave?

is the jumper set to slave?

V · 03-23-2006, 08:36 PM

yup, and its hooked up the the grey slave IDE connector, power plug is there too, it boots up to windows like usual, but i cant find anywhere in add new hardware or such that theresanother HD...

ShitOnWheels · 03-23-2006, 08:39 PM

Quote:

Originally Posted by SmokingSS

yup, and its hooked up the the grey slave IDE connector, power plug is there too, it boots up to windows like usual, but i cant find anywhere in add new hardware or such that theresanother HD...

YOu should just be able to go into my computer and see the new drive. If not, you need to reboot and try clicking the Del, Esc, F2 buttons. It depends on the BIOS how to get into it. And you have to click whatever button before it starts listing drives as it's booting (I normally just start repeatedly hitting the button once it's started to reboot).

turbo96z28 · 03-23-2006, 08:40 PM

Quote:

Originally Posted by SmokingSS

yup, and its hooked up the the grey slave IDE connector, power plug is there too, it boots up to windows like usual, but i cant find anywhere in add new hardware or such that theresanother HD...

can you take any pics of the HD and the way it's wired in?

V · 03-23-2006, 08:47 PM

slave on top, master on bottom, the connector end is in the master the connector inline goes to the slave.