Parts Cleanout - TH400, Dana 44, Exhaust, etc - NJFBOA - Home of New Jersey's Camaros and Firebirds

Tru2Chevy · 06-06-2010, 05:19 PM

Stock style chrome centerbolt valve covers (Pic) - $10 per pair

3rd gen intermittent wiper motor - $15

Pair of hatch struts (82-92) worked great when removed - $15

2 pairs of stock clear front marker lights - $20 / pair

Full 3rd gen exhaust - (Pictures Here)
- Hooker Super Comp headers, 3" collectors (#2210) - $275
- Mufflex Y Pipe with o2 bung (dual 3" into single 4") with 4" to 3" reducer - $200
- Flowmaster American Thunder cat back (3" in, dual 3" out) w/ cat welded on - $200
- Take it all together for $625 (New it would cost you almost $1,200)

TH400 3 speed trans, good hard parts, been sitting on a shelf for many years, should probably be rebuilt before using - $150

120 mph gauge cluster from an '89 Formula (Pic 1, 2, 3) - $50 (Comes with this box needed to convert from a cable driven speedo.)

Firebird Gauge bezel with buttons for hatch defrost and hatch release (Pic) - $15

Horn Cover for Firebird steering wheel (Pic 1, 2) - $10

Wire pigtail for rear view mirror with map lights (Pic 1, 2) - $3

Misc. Interior plastics (Pic 1, 2, 3, 4, 5) - $5 each

Dana 44 rear (8.5" ring gear) - bolt in for a 3rd gen, has brand new, professionally installed Auburn Pro Series posi & 4.09 gears, no brakes - $1,600 (Pics) - SOLD

Willing to make a deal on anything. Trying to move as much of this stuff as possible.

Will supply pictures of anything on request
More to come....

- Justin

iroc86NJ · 06-07-2010, 04:56 PM

In your opinion would the Mufflex Y Clear a Spohn chassis mounted Tq. Arm?
If it will, how much for it?

Tru2Chevy · 06-07-2010, 08:23 PM

I have no clue if it would clear or not. Never been under a 3rd gen with that arm, so I can't really take a guess.

- Justin

Tru2Chevy · 06-12-2010, 08:09 PM

TTT

- Justin

79camaro · 06-12-2010, 11:35 PM

I'm almost positive it will clear that arm. I have a similar setup with a 4" mufflex system along with a complete UMI setup(arm, trans member, swap bar. etc) and I have no clearance issues. The only thing that may be a p.i.t.a would be if you have a aftermarket "boxed" trans member. They usually require some flattening of the y-pipe.

wretched73 · 06-13-2010, 03:05 PM

Do the headers have the jet hot coating by any chance?

joedruryfloors · 06-13-2010, 04:59 PM

do you still have the trans very inter.:

Tru2Chevy · 06-13-2010, 09:13 PM

Quote:

Originally Posted by 79camaro

I'm almost positive it will clear that arm. I have a similar setup with a 4" mufflex system along with a complete UMI setup(arm, trans member, swap bar. etc) and I have no clearance issues. The only thing that may be a p.i.t.a would be if you have a aftermarket "boxed" trans member. They usually require some flattening of the y-pipe.

Thanks!

Quote:

Originally Posted by wretched73

Do the headers have the jet hot coating by any chance?

No, as seen in the pics linked in the first post, they are painted, with some surface rust on them.

Quote:

Originally Posted by joedruryfloors

do you still have the trans very inter.:

Yes, I still have the TH400.

- Justin

joedruryfloors · 06-14-2010, 04:34 PM

Give me a call..I'll come take a look at it.

Joe
856-816-8401

Tru2Chevy · 06-15-2010, 07:57 PM

Quote:

Originally Posted by joedruryfloors

Give me a call..I'll come take a look at it.

Joe
856-816-8401

PM Sent

- Justin

Tru2Chevy · 06-22-2010, 11:37 PM

TTT

- Justin

Tru2Chevy · 06-26-2010, 09:04 PM

Prices updated.....

- Justin

FoodStampsz · 06-28-2010, 06:00 PM

still got that exhaust?

Tru2Chevy · 06-28-2010, 06:01 PM

Quote:

Originally Posted by FoodStampsz

still got that exhaust?

Yes, still have it all.

- Justin

Tru2Chevy · 07-04-2010, 06:12 PM

Still trying to get this stuff cleared out.....any offers?

- Justin

Tru2Chevy · 08-16-2010, 11:35 PM

Bump....

- Justin

iMaMoN5Ta · 08-17-2010, 01:01 AM

Would love to grab some interior parts but you're a bit of a distance away

Tru2Chevy · 08-17-2010, 04:54 PM

Quote:

Originally Posted by iMaMoN5Ta

Would love to grab some interior parts but you're a bit of a distance away

Shoot me a PM and let me know what you want. I would be willing to cruise down 295 some to meet you if you want to buy several parts.

- Justin

Tru2Chevy · 09-25-2010, 08:46 PM

TTT.....still have plenty for sale, more coming as soon as I can get it out of the basement to confirm condition - including an LS1 aluminum driveshaft.

- Justin

Tru2Chevy · 11-13-2010, 10:30 PM

Bump.....prices dropped, willing to listen to all offers.

- Justin

Tru2Chevy · 01-04-2011, 10:02 PM

TTT....

- Justin

Tru2Chevy · 01-23-2011, 10:53 PM

Bump.....willing to bring any parts to the club meet this weekend and sell at a nice discount.

- Justin

Jersyboyy · 02-15-2011, 10:42 PM

Would you be willing to ship the exhaust?

Tru2Chevy · 02-16-2011, 10:59 PM

I could ship it - would likely have to make a few cuts to get the entire setup packed into a couple of boxes though.

$625 + actual shipping cost.

- Justin

Jersyboyy · 02-26-2011, 08:05 PM

Basically throw it on their weld on what you cut and its good to go? Would you be willing to sell the exhaust minus the headers? gimme a week and your paypal info and you will have cash. Find out how much to ship to 27526.