 |
04-17-2011, 04:57 PM
|
#1
|
|
12 Second Club
Join Date: Mar 2009
Location: metuchen, nj
Posts: 1,476
|
c-clip eliminator question
i need to buy C-clip eliminators cause i have aftermarket axles. i dont even know how to begin figuring out which kind i need, anyone wanna help me out?
__________________
|
|
|
|
04-17-2011, 05:25 PM
|
#2
|
Join Date: Sep 2008
Location: Warminster PA
Posts: 12
|
Strange makes a nice set that doesnt have the common problems with leakage. You could also just go with 9" ends/bearings depending on how far into cutting and modification you want to get.
__________________
1995 Z28 •385 LT1•T56 Transmission•F1A Procharger•UMI Suspension•Strange S-60•17" AR torq thrusts•Built by JS Performance
2004 HD Nighttrain •95ci•Simon's Custom Performance Cams•V&H Pipes•Corbin Snake skin Seat
2008 Ford F250 •6.4 Power stroke•20" Dante wheels with 35" Nitto tires
|
|
|
|
|
04-17-2011, 05:26 PM
|
#3
|
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
What type of rear is this? What brakes are you going to use? Some eliminator kits and end packages dont work with some of the brakes that f bodys came with.
__________________
JSSPEEDANDCUSTOM.COM
|
|
|
|
|
04-17-2011, 06:10 PM
|
#4
|
|
12 Second Club
Join Date: Mar 2009
Location: metuchen, nj
Posts: 1,476
|
i plan on using the stock brakes and the rear has tenbolt axle tubes
__________________
|
|
|
|
|
04-17-2011, 07:40 PM
|
#5
|
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
What year? and what brakes?
__________________
JSSPEEDANDCUSTOM.COM
|
|
|
|
|
04-17-2011, 08:11 PM
|
#6
|
|
12 Second Club
Join Date: Mar 2009
Location: metuchen, nj
Posts: 1,476
|
95 formula, standard disks
__________________
|
|
|
|
|
04-17-2011, 08:17 PM
|
#7
|
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
Probably not going to work with any c-clip eliminator kit I know of. You could go with 9" housing ends but I dont see that being worth while on a 10 bolt.
__________________
JSSPEEDANDCUSTOM.COM
|
|
|
|
|
04-18-2011, 07:35 PM
|
#8
|
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,476
|
Quote:
Originally Posted by thunder
i plan on using the stock brakes and the rear has tenbolt axle tubes
|
Can you tell us more about the rear? Vagueness doesn't help with things like this.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
|
|
04-19-2011, 11:42 AM
|
#9
|
|
12 Second Club
Join Date: Mar 2009
Location: metuchen, nj
Posts: 1,476
|
ok so i think ive figured this one out possibly. Apparently i need to put my backing plates on the axles and then have bearings pressed on top of that to hold the plates in places. looks like with this set up its the actual backing plates that hold the axles in. i have never heard of something like this but apparently it can be done.
and Justin sorry about that, ive been a mess with school and getting the car together so sorry for being a bit curt
__________________
|
|
|
|
|
04-19-2011, 10:37 PM
|
#10
|
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
What you are describing sounds like a 9" bearing conversion.. The ends of the axle tubes need to be cut off and new ends welded on to the tubes that will accept the big bearing..
__________________
JSSPEEDANDCUSTOM.COM
|
|
|
|
|
04-19-2011, 10:44 PM
|
#11
|
|
12 Second Club
Join Date: Mar 2009
Location: metuchen, nj
Posts: 1,476
|
Quote:
Originally Posted by JSPERFORMANCE
What you are describing sounds like a 9" bearing conversion.. The ends of the axle tubes need to be cut off and new ends welded on to the tubes that will accept the big bearing..
|
want me to get you a picture of the housing ends? would that help?
__________________
|
|
|
|
|
04-19-2011, 11:06 PM
|
#12
|
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
Sure..
__________________
JSSPEEDANDCUSTOM.COM
|
|
|
|
|
04-21-2011, 06:49 AM
|
#13
|
Join Date: May 2006
Location: Midland Park, NJ
Posts: 1,389
|
It probably wouldnt be very hard or expensive to have grooves machined in the axles on a standard lathe.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
