 |
|
11-13-2013, 10:50 AM
|
#76
|
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,370
|
|
|
|
|
11-13-2013, 10:54 AM
|
#77
|
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,389
|
Quote:
Originally Posted by KirkEvil
Can you fit tubs with the vert top folded?
|
Apparently yes but it's not happening.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
'17 Sierra 2500HD Dmax
'17 Lex LS460
|
|
|
|
|
11-13-2013, 07:48 PM
|
#78
|
|
10 Second Club
Join Date: Dec 2004
Location: Woodstown, NJ
Posts: 702
|
i was having good luck w/ the MT DR Pro its a 28" and have no issues in the fender well if you want to go the DR route, im not sure about the 28" bias ply tho since they grow about an inch, I know Rob (barneymobile) had to cut his fenders to get his 28s to fit
-brandon
__________________
01 Z06- blown (for now  ) 10.40 @ 140.7
99 M3- NASA #181
00TA- H/C/I= 10.83 @ 130 1.58 493hp/424tq SOLD
www.fquick.com/Demonicbird00
|
|
|
|
|
11-16-2013, 08:48 AM
|
#79
|
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
Justin, where art thou pixels?
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
|
|
11-22-2013, 06:45 PM
|
#80
|
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,941
|
Dear Admin, donde esta los pictures??!?!?
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
|
|
11-22-2013, 07:57 PM
|
#81
|
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,370
|
Si Bato!
|
|
|
|
|
11-24-2013, 11:41 AM
|
#82
|
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,941
|
Not even a "no pictures for you" post by the slackeradmin?
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
|
|
11-24-2013, 12:40 PM
|
#83
|
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,677
|
Quote:
Originally Posted by LTb1ow
Not even a "no pictures for you" post by the slackeradmin?
|
He would have to be on to post. Last Activity: 11-17-2013 10:39 PM
__________________
John
Last edited by Featherburner; 11-24-2013 at 12:40 PM.
|
|
|
|
|
11-24-2013, 02:11 PM
|
#84
|
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,370
|
Quote:
Originally Posted by Featherburner
He would have to be on to post. Last Activity: 11-17-2013 10:39 PM
|
That is post racewars brah 
|
|
|
|
|
11-24-2013, 05:29 PM
|
#85
|
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,677
|
Quote:
Originally Posted by sweetbmxrider
That is post racewars brah |
Time travel, brah! 
__________________
John
|
|
|
|
|
11-25-2013, 03:38 PM
|
#86
|
|
12 Second Club / Bullwinkle
Join Date: Oct 2010
Location: Old Bridge, NJ/Corpus Christi, TX
Posts: 1,847
|
Quote:
Originally Posted by Blackbirdws6
I am also considering a bigger tire. I can go wider and would like to get a 28. I need to do some research on the potential mods that will be required to the fender well if I go that route.
|
I fit a 28x11.5 ET Drag in mine. Had to massage the inner fenders a lot and remove the bump stops. I am stock height so I didn't have to roll the fenders. I would definitely get an adj panhard bar and adj lca's if you don't have them already to get the rear centered both across the car and in the center of the wheel well. That will make it less painful when it comes time to make them fit...
__________________
1994 Medium Patriot Red Z28 6spd
370ci/Huron Speed T6 S480 ET-R HO
Quote:
Originally Posted by Jersey Mike
Quote:
Originally Posted by WSex
who is FFB?
|
An NJFBOA legend. Ask about him at the next meet. |
|
|
|
|
|
11-25-2013, 06:59 PM
|
#87
|
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
|
|
11-25-2013, 07:02 PM
|
#88
|
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,941
|
Well then, that doesn't look good.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
|
|
11-25-2013, 07:19 PM
|
#89
|
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
I put about 25 milies on it driving around on the street and it felt fine. No noticeable loss of power, idled fine, and no smoke. I only pulled the head because the leak down tester held no pressure whatsoever...I thought I was using the tool wrong haha
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
|
|
11-25-2013, 07:20 PM
|
#90
|
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,941
|
Pop out the piston/rod, replace piston, and toss it back together
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
|
|
11-25-2013, 07:23 PM
|
#91
|
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,389
|
Ouch. Running 10s on 7 cylinders is pretty good. If you read around, the #7 failure seems to be prevalent....at least from what the internet says. They even fail in the top left corner too. If the cylinder wall looks ok, replace the piston and get it back together.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
'17 Sierra 2500HD Dmax
'17 Lex LS460
|
|
|
|
|
11-25-2013, 08:05 PM
|
#92
|
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
It definitely needs sleeved. Fixing the block might be a fun winter project but partout is looking more likely.
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
|
|
11-26-2013, 07:33 AM
|
#93
|
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,370
|
Some men, just want all the weight reduction.
|
|
|
|
|
11-26-2013, 06:24 PM
|
#94
|
|
10 Second Club
Join Date: Dec 2004
Location: Woodstown, NJ
Posts: 702
|
ouch! whats your plan? another sbe or add cubes?
-brandon
__________________
01 Z06- blown (for now ) 10.40 @ 140.7
99 M3- NASA #181
00TA- H/C/I= 10.83 @ 130 1.58 493hp/424tq SOLD
www.fquick.com/Demonicbird00
|
|
|
|
|
11-26-2013, 06:31 PM
|
#95
|
|
11 Second Club
Join Date: Feb 2008
Location: Edison, NJ
Posts: 4,620
|
Someone on tech has a great deal on a LS2 sleeved block... 
__________________
1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
2006 GTO, 11.48 @ 118.3
|
|
|
|
|
11-26-2013, 07:46 PM
|
#96
|
|
10 Second Club
Join Date: Dec 2004
Location: Woodstown, NJ
Posts: 702
|
Quote:
Originally Posted by NJ Torque
Someone on tech has a great deal on a LS2 sleeved block... |
yea def a good starting point if he wants to go big cube 
__________________
01 Z06- blown (for now ) 10.40 @ 140.7
99 M3- NASA #181
00TA- H/C/I= 10.83 @ 130 1.58 493hp/424tq SOLD
www.fquick.com/Demonicbird00
|
|
|
|
|
11-26-2013, 09:58 PM
|
#97
|
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
I would love to put together a 402, but this will be the end of my fbody money pit. Ive been wanting to get into a C5 as a better starting platform and this was my breaking point. The tear down for the partout plus all the other stuff Ive been hoarding will happen sometime this weekend, stay tuned if you're looking for some giddy up parts.
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
|
|
11-26-2013, 10:02 PM
|
#98
|
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,677
|
Quote:
Originally Posted by KirkEvil
I would love to put together a 402, but this will be the end of my fbody money pit. Ive been wanting to get into a C5 as a better starting platform and this was my breaking point. The tear down for the partout plus all the other stuff Ive been hoarding will happen sometime this weekend, stay tuned if you're looking for some giddy up parts.
|
I saw this coming. With all the FRC pictures you've been posting, it was only a matter of time.
__________________
John
|
|
|
|
|
12-02-2013, 07:47 PM
|
#99
|
|
10 Second Club
Join Date: Dec 2004
Location: Woodstown, NJ
Posts: 702
|
Did anyone get a vid of either of my passes?
I raced KirkEvil on my 2nd pass, cant remember who i ran on my first pass
thanks
brandon
__________________
01 Z06- blown (for now ) 10.40 @ 140.7
99 M3- NASA #181
00TA- H/C/I= 10.83 @ 130 1.58 493hp/424tq SOLD
www.fquick.com/Demonicbird00
|
|
|
|
|
12-02-2013, 08:18 PM
|
#100
|
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,370
|
I gave up on mas media 
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
