 |
04-27-2010, 05:42 PM
|
#1
|
Join Date: Aug 2009
Location: South Dennis
Posts: 48
|
GM E-Rod crate motor no longer just for the shiftless
Just saw this posted on AutoBlog
Quote:
Back in November, General Motors unveiled a new crate motor at the SEMA show. Dubbed the "E-ROD," it was designed to meet the needs of the modern hot-rodder. It offered an out-of-the-box performance option for people who wanted to build a project vehicle, but who didn't want to worry about legal hassles that can come with using older engines. The E-ROD engine isn't really new... it's basically the base Corvette powerplant, adapted for mounting in just about anything. It's a 6.2-liter LS3 rated at 430 horsepower and 424 pound-feet of torque, and pointedly, it's also fully emissions compliant, which is the main draw.
Rather than just display the engine on a stand at SEMA, though, GM decided to install an E-ROD in a beautifully restored '55 Chevy, one that we recently had the opportunity to see up close again. It's a stunning show car in a fairly understated wrapper. The interior is particularly impressive, with its tri-tone fabrics and retro dash and gauge cluster that hides secret "Check Engine" lights. A fun project, no doubt, but there was one slight flaw – the E-ROD '55 Chevy was running an automatic tranny. Not that there's anything wrong with that, but the real shame was that the engine wasn't available with a manual transmission option.
Today, GM announced that they've remedied that situation. The Bow-Tie boys and girls have just released part number 19256487, a new E-ROD LS3 calibrated for manual transmissions. The only real difference compared to the automatic version is in the electronic control module's programming. The new version is available as of today for $9,375 – the same as the automatic version. So if you have a hot rod project that could use modern Corvette power, give them a call. More info in the presser after the jump, and a gallery of the E-ROD '55 Chevy and a Superformance Cobra MK III roadster (gasp!) with the E-ROD installed.
|
Just thought that those of you with projects and those without would like to see this.
|
|
|
|
04-27-2010, 08:12 PM
|
#2
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
cant go wrong with 430hp but there just something about the big block chevys from back in the day. plus it barely fills the engine bay of that '55
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock  SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
|
|
04-27-2010, 08:22 PM
|
#3
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,165
|
That is a real nice kit for applications that need emissions compliance. Like California.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
