|
12-11-2004, 01:06 AM
|
#1
|
Guest
|
Pinging?
i just got my Firebird home today and at WOT im hearing like a pinging or snapping noise. anyone have any idea?
|
|
|
12-11-2004, 01:36 AM
|
#2
|
Join Date: Aug 2004
Location: Montgomery NJ
Posts: 1,271
|
Depending on the ping I'd say it's a lifter out of adjustment. Do you have an SES light?
You won't believe this because I can't believe it either but I have a 91 grand marquis that pings with low octane fuel. I don't know why but the pinging is audible and very nasty... you'd think for a completely stock motor that the knock sensor would have picked it up before it got that bad!
Relash your lifters just to be certain.
__________________
, Jon
Owner of a Red Sled.
If it\'s EFI I can tune it. Specialize in 82-95 GM (yes Lt1\'s)
\"If you can leave black marks on a straight from the time you exit a corner till the time you brake for the next turn.......Then, you have enough horsepower\" - Mark Donohue
|
|
|
12-11-2004, 01:44 AM
|
#3
|
Guest
|
If i knew how i would the SES light isnt on and i JUST filled it with Plus from a super wawa. i was told it has a cam in it but if so it must be really mild cause you cant hear it at idle. im gonna do a full tune up on it $$$$$$$$$$$$$$$ and an Ignition system (anyone have one in mind for a L98?) Hit me up on AIM if you dont mind i have a couple questions for ya. Smartass15864 is my SN
|
|
|
12-11-2004, 02:24 AM
|
#4
|
Guest
|
oh when i said i was doing the tune up and ignition system i was hoping that would solve the problem since i have no idea as to what im doin with the lifters
|
|
|
12-11-2004, 01:00 PM
|
#5
|
Join Date: Aug 2004
Location: Fl.
Posts: 616
|
it could also be the timing... check your timing and set it at stock then adjust from there
__________________
Boats and hos.
Current: 1999 Jeep Cherokee Sport 4.0L
Old: 1990 Firebird Formula WS6, 1991 Camaro RS, 1992 Nissan Stanza
|
|
|
12-11-2004, 05:22 PM
|
#6
|
Join Date: Aug 2004
Location: Montgomery NJ
Posts: 1,271
|
Since it's fuel injected AND you're getting an audible ping AND no SES light then I doubt it's your timing. There are routines in the code that test the knock sensor by advancing the timing until knock counts occure, if that test doesn't complete then it does it again with more advance. If no counts are detected the ecm thinks the knock sensor is bad and will set a code 43 and the car will run like absolute arse. It'll stop controlling spark so you'll be using the base timing and then a little more at a specific rpm, can't tell you how much it is or where cause I forget.
I'm back to my idea about lifters. You should set the lash on them.
Could the pinging be an exhaust leak near the engine? Sometimes they sound like pinging metal. Do a full check-up and bring it to a mechanic and pay him $20 to find out what's wrong with the car. I used to do this when I had no idea what I was doing. Saved me a lot of headaches and down time.
__________________
, Jon
Owner of a Red Sled.
If it\'s EFI I can tune it. Specialize in 82-95 GM (yes Lt1\'s)
\"If you can leave black marks on a straight from the time you exit a corner till the time you brake for the next turn.......Then, you have enough horsepower\" - Mark Donohue
|
|
|
12-11-2004, 09:16 PM
|
#7
|
Join Date: Oct 2004
Posts: 365
|
run higher octane maybe? if its an engine ping
__________________
AIM: blacktoprecs
|
|
|
12-12-2004, 12:52 AM
|
#8
|
Guest
|
how do i set the lash on them?
|
|
|
12-12-2004, 10:58 AM
|
#9
|
13 Second Club
Join Date: Jul 2004
Location: Ewing/Galloway, NJ
Posts: 3,904
|
__________________
EB
99 Riviera, Bone stock, 14.34 @ 96 "Walking 5.0's in luxury" RIP
95 Cherokee, Bone stock 16.2 @ 83 "Treeing your 3rd gen and beating it to the line despite trapping less....and looking better"
93 TA, Bone stock, 13.8 @ 100 "Beating ****** drivers in ****** LS1's"
https://www.facebook.com/groups/285090241699967/
R.I.P. Tia
|
|
|
12-12-2004, 10:10 PM
|
#10
|
Keyboard Tough Guy
Join Date: Jul 2004
Location: Trenton, NJ
Posts: 6,341
|
Quote:
Originally Posted by Squirrel
|
i'll have to save that, cool site eric.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|