|
06-26-2008, 10:32 PM
|
#1
|
12 Second Club
Join Date: Nov 2004
Location: Haddon Twp NJ
Posts: 2,213
|
Frustrating
I ran at atco last week got two runs with MTs. A best of a 12.8 at 106. Ran again tonight the first run i ran a 12.9 at 105. Not bad considering it was hot and the sun was still out. The last 3 times I ran a 13.044 at 104. All of them consistent with nice 1.8 60s just seems slow compared to what i have ran and the mods my car has. My Trans is shifting so weird and got worse as the night went on. It lags the shift from 2-3. It will shoot past redline to about 6500 and bounce off the rev limiter for easily a tenth or two and then shift. Some times it also likes to upshift down shift upshift. So on one of the runs i tried to manual shift 2-3. That made it worse ended up having the problem from 1-2 and 2-3.
Any ideas my guess is electrical problem and the shifting point is off. Im not running again until i buy hp tuners hopefully this week. Sorry for the rant just annoying cause it doesnt seem to be a problem on the street. I hope my trans isnt going
________
Weed vaporizers
Last edited by 69BirdX; 04-03-2011 at 12:00 AM.
|
|
|
06-26-2008, 10:34 PM
|
#2
|
BadMod
Join Date: Aug 2004
Location: hamilton, nj
Posts: 8,889
|
humidity went up tonight as the sun went down.......
__________________
So much stupid, so little time.
Quote:
Originally Posted by 79CamaroDiva
It started before I drove your car. I just have to look at it the wrong way and your car poops parts.
|
Mercerville MotorSports, LLC
|
|
|
06-26-2008, 11:38 PM
|
#3
|
12 Second Club
Join Date: Nov 2004
Location: Haddon Twp NJ
Posts: 2,213
|
Yea im sure it prob did. The shifting problem is really killing my time. I was runnig 13.09 on street tires with a 60 foot of a 2.0. I could only ease into the pedal. Now im launching at 1200 and getting a little better.
________
Alaska Dispensaries
Last edited by 69BirdX; 04-03-2011 at 12:00 AM.
|
|
|
06-28-2008, 04:42 PM
|
#4
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
|
Have you tried bringing the car up on the converter before you launch it, or have you always launched it off idle (or just above idle)?
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
06-29-2008, 09:42 AM
|
#5
|
12 Second Club
Join Date: Nov 2004
Location: Haddon Twp NJ
Posts: 2,213
|
ive been launching it at 1200 to 2k. I was gonna try higher but going from 1200 to 2k it got slower. I think i figured out my problem. I think car hasnt been tuned for the converter and gears. So once i get hp tuners we shall see
________
WEED VAPORIZERS
Last edited by 69BirdX; 04-03-2011 at 12:02 AM.
|
|
|
06-29-2008, 04:20 PM
|
#6
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
|
Yea, that will surely help. Play around with the launch more too. Try loading the converter up, try flashing the converter from idle, and different spots in between, then stick with whatever seems to be working the best.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
06-29-2008, 07:09 PM
|
#7
|
12 Second Club
Join Date: Nov 2004
Location: Haddon Twp NJ
Posts: 2,213
|
thats why i was stickin with 1200. when i tried 3k the spun and has some wheel hop. I dont think i got a good burn out and they were brand new first time on the car. So maybe ill try that again. I beat a 12.67 C5 z06 until the 1000 foot. Thats were my car is having its shifting problems.
________
MARIJUANA CARD
Last edited by 69BirdX; 04-03-2011 at 12:02 AM.
|
|
|
06-29-2008, 07:30 PM
|
#8
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
|
Yea, get the tune worked out, then try again.
Rear suspension all stock?
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
06-29-2008, 07:41 PM
|
#9
|
12 Second Club
Join Date: Nov 2004
Location: Haddon Twp NJ
Posts: 2,213
|
yea except for a sphon torque arm. I def need to LCA and some sub frame connectors
________
Masturbation pussy
Last edited by 69BirdX; 04-03-2011 at 12:03 AM.
|
|
|
06-29-2008, 09:14 PM
|
#10
|
Join Date: Aug 2005
Location: Millville & Little ferry New Jersey
Posts: 454
|
You probably have a few problems but atleast they are tunning issues..
1. a 4L60E will not shift into 4th gear at w.o.t.
2. Torque management program.. delete it and the car will feel like a new beast..
3. a few other tuning issues due to the converter and ect but it can be corrected..
__________________
2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E.
QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn.
Cartek Tuned...
|
|
|
06-29-2008, 10:39 PM
|
#11
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
|
Quote:
Originally Posted by ins0mnia24
You probably have a few problems but atleast they are tunning issues..
1. a 4L60E will not shift into 4th gear at w.o.t.
2. Torque management program.. delete it and the car will feel like a new beast..
3. a few other tuning issues due to the converter and ect but it can be corrected..
|
His problem is the 2-3 shift, not 3-4....
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
06-30-2008, 12:15 AM
|
#12
|
Join Date: Aug 2005
Location: Millville & Little ferry New Jersey
Posts: 454
|
Yes that also falls into where I mentioned Torque Management programing..
If I remember correctly there is different tables for it 1-2, 2-3
And it can force a downshift besides cutting back timing and fuel to the engine..
I would definitely find someone that can tune automatics good..
__________________
2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E.
QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn.
Cartek Tuned...
|
|
|
06-30-2008, 05:41 PM
|
#13
|
12 Second Club
Join Date: Nov 2004
Location: Haddon Twp NJ
Posts: 2,213
|
I think my major problem is not having the car tuned for gears. So hopefully when i buy hp tuners and calibrate the VSS everything else will be fine.
________
Ipad Accessories
Last edited by 69BirdX; 04-03-2011 at 12:03 AM.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|