Another 84' Z/28 for parts

[dpmalibu]

--------------------------------------------------------------------------------

just like title says I just got another 84 Z/28 for parts. This one is not going to get stripped down too much b/c I plan on selling most of it as a roller as soon as I get the title. It has a 91 nose, high rise spoiler and ground efx on it. It is very solid. Floors,1/4's, trunk area, pass. door, fenders are all solid.It is a T-top car w/ sub frame connectors and an Competition Engineering 8pt roll cage. The rear is a stock open diff 10 bolt. The dash pad is almost perfect other than a hole drill in the middle for the tach wire. It has a digital dash (don't know if that is stock or out of a T/A). The interior has a stock console with a B+M mega shifter. It has (1) plastic racing bucket seat.

Here is a list of the exterior parts that are for sale:

1) Harwood 4" bolt on cowl hood in perfect shape $425

2) (4) 17x8" SLP chrome 5 spoke wheels w/ tires and 2" spacers. (Wheels are almost perfect other than one wheel is peeling. No curb rash. Tires have a lot of tread but has some dry rot). $500

3) Tail light covers (have to check condition) $20

4) Headlight covers (have to check condition) $15

5) Edelbrock STB for Carb/TBI


Interior parts for sale:

1) B+M Console Megashifter for T-350 $85

2) Almost perfect dash pad w/ hole drilled in middle for tach wire to run thru $95

3) Plastic racing buckets w/ seat track $40

4) Autometer 5" tach $100

5) triple gauge (oil press, water temp, volts) $20

Drivetrain parts:

1) T-350 manual reverse valve body has approx. 6-8k miles $500

2) Custom mandrel bent Mufflex exhaustw/ headers : has custom 3" Y-pipe which goes into a 4" intermediate pipe into a Spintech muffler w/ dual 3" tailpipes. Unknown shorty headers Ii'll have to check them) $500

3) another set of shorty headers $95

4) mini starter dual bolt pattern (don't know brand $75

5) MSD 6AL $125

6) MSD HEI distributor $80

7) 3 core radiator $85

8) Electric fan ( I beleve it's 16" but I'll measure it) $60

9) Carter 750 carb (heavily oxidized. been sitting awhile) needs rebuild $75



I'll start looking at this stuff and closely checking out condition in next day or so before it snows again.

Located in Hatboro,Pa

Pics:

[dpmalibu]

Cowl hood, center console,B+M shifter and T-350 related conversion parts and Mufflex exhaust are sold.

[Whoboy580]

how much for car as a roller?

[dpmalibu]

$850 B/O

Car now has 15" Z/28 wheels, No exhaust and no hood, No console or shifter. Comes with the racing bucket seat w/ (2) seat tracks , gauges.

How it looks now:

[Whoboy580]

I told him and he seems very interested just needs to sell his 1985 Camaro first. Here little info on it you might know someone who is interested.

This is a 1985 camaro iroc z28 that is painted pearl white with a black engine bay brand new motor mounts and a few other body pieces including a hardwood 2.5 inch pin on cawl hood. No motor. No trans. No rear. No wheels. Full interior minus shifter. Other pieces like wheels, tublar k member with control arms and a manual steering rack, and a tublar cross member for a th350 trans and relocation bracket for torque arm, the rear which is a 98 wx6 trans am rear with 456 gears and disc brakes can all be included with additional cost.

[dpmalibu]

Nice car. i do have soebody interested but he wants it stripped down a little. Either way First come first serve. Just waiting for the title from Penn Dot then I will put it uop for sale officially.

[Whoboy580]

Sold his car and he said he is trying to get a hold of you.

[dpmalibu]

Whoboy sent you a PM w/ my #

[Jersyboyy]

still got this?