|
|
08-03-2019, 02:45 PM
|
#2276
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,359
|
Quote:
Originally Posted by LS1ow
nonsense, 2.4ghz good for atleast 1 mile.
|
Mmkay. Bring a spare revo
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
08-06-2019, 12:57 PM
|
#2277
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
tracking numbers for cage received.
so scare.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-06-2019, 03:54 PM
|
#2278
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,359
|
Should be a simple install on the Revo.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
08-07-2019, 06:34 AM
|
#2279
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Quote:
Originally Posted by Blackbirdws6
Should be a simple install on the Revo.
|
pull out all the threads.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-09-2019, 07:37 AM
|
#2280
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Swing set arrived. Pre-Notched for my pleasure.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-13-2019, 10:09 AM
|
#2281
|
13 Second Club / Moderator
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,689
|
Quote:
Originally Posted by LS1ow
Swing set arrived. Pre-Notched for my pleasure.
|
TFTI
__________________
Quote:
Originally Posted by LS1ow
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
|
|
|
|
08-28-2019, 06:27 AM
|
#2282
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
so somewhere in the past 4 months i lost the nut that holds the main power cable from the battery to the fuse box. I tried a few different ones i had sitting in hardware drawers, but no success.
Anyone know what size is needed?
its the nut that is under the red cover.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-28-2019, 06:44 AM
|
#2283
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,359
|
Since the car is so light, can't you take it to a Lowe's or Home Depot and spin it in that bolt/nut finder?
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
08-28-2019, 06:49 AM
|
#2284
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Quote:
Originally Posted by Blackbirdws6
Since the car is so light, can't you take it to a Lowe's or Home Depot and spin it in that bolt/nut finder?
|
i did that yesterday but didnt have enough clearance to spin car completely around since its only mounted like 5' off the ground.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-28-2019, 08:26 AM
|
#2285
|
11 sec club
Join Date: Aug 2014
Location: Woodbridge
Posts: 834
|
If my memory serves me right, it’s the same size as a starter solenoid for an older ford. I use those for snow plowing cause they are heavy duty and easily accessible.
__________________
99 Z28 Trick Flow 215s milled to 61cc 228/232 Cam Fast 102 built 4l65e trans 4000 converter 12 bolt 410s Electric WP deleted PS/AC Dyno & Track tuned
2015 ATS Coupe. AWD 2.0 Turbo
2012 2500hd Silverado with LTZ 20s on 35x12.5x20
86 Buick GN Lesabre 1 of 117 (4-Sale)
|
|
|
08-28-2019, 09:17 AM
|
#2286
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
3/8NC16
|
|
|
08-28-2019, 10:16 AM
|
#2287
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,359
|
Quote:
Originally Posted by LS1ow
i did that yesterday but didnt have enough clearance to spin car completely around since its only mounted like 5' off the ground.
|
I would have at least thought you would just ripped it off from HD and brought it home. It's one of those things I should just buy before doing my next project.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
08-28-2019, 08:59 PM
|
#2288
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
Quote:
Originally Posted by LS1ow
so somewhere in the past 4 months i lost the nut that holds the main power cable from the battery to the fuse box. I tried a few different ones i had sitting in hardware drawers, but no success.
Anyone know what size is needed?
its the nut that is under the red cover.
|
Believe it is M8x1.25.
Mcmaster 97400A102 or try lowes for SS flange nuts
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
08-29-2019, 11:46 AM
|
#2289
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Quote:
Originally Posted by KirkEvil
Believe it is M8x1.25.
Mcmaster 97400A102 or try lowes for SS flange nuts
|
|
|
|
09-12-2019, 12:39 PM
|
#2290
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Not much to update on.
Cage work as begun. Went with an S&W kit, so far so good. Main hoop was a little long on both sides, but other than that so far its going smooth.
Also opted to get a set of these bad girls. Aluminum door panels from Big Wig RaceCars. Precut and drilled, beveled border, and have an aluminum bracket on them to reuse factory switches.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
09-14-2019, 07:39 AM
|
#2291
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
really wanted to leave the door panels raw, but figured satin black would tie in much better and wouldn't immediately catch any potential uhhh... clients... eyes.
install was super simple. Completely reversible as well. Supplied everything you need to install, even the drill bit. The hardware is really nice as well. They are counter sunk screws with counter sunk button washers. Looks nice. I may end up swapping the stainless ones for black ones if i can find them, but this will certainly do.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
09-15-2019, 07:00 AM
|
#2292
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,359
|
Looks good. What's the weight savings on the panels?
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
09-16-2019, 07:01 AM
|
#2293
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Pretty slick, sir.
|
|
|
09-16-2019, 07:32 AM
|
#2294
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Quote:
Originally Posted by Blackbirdws6
Looks good. What's the weight savings on the panels?
|
with panels/door speakers/magic it should be 25/30lbs
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
09-27-2019, 09:49 AM
|
#2295
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
cage is in place and ready for final install. buddy is coming down with tig on monday night to burn her in.
Plan is slide cage forwards and weld rear bars to main hoop, slide cage back into position and bolt it. was going to skip bolting in all together, but i figure bolting it down will suck the plates "form" the plates to the body better than a hammer will. Then weld the plates in.
..and hopefully never test it out.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
Last edited by LS1ow; 09-27-2019 at 09:51 AM.
|
|
|
09-27-2019, 10:48 AM
|
#2296
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,900
|
Be careful on driver ankle biter, your fuel lines are right under it.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
09-27-2019, 12:24 PM
|
#2297
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Quote:
Originally Posted by LTb1ow
Be careful on driver ankle biter, your fuel lines are right under it.
|
good thinkin. Should be able to slide welding blanket between lines and floor
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
10-05-2019, 09:00 AM
|
#2298
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
swing set 80% in.
Tubes completely Tig'd. Plates bolted down and tac'd. Will completely weld plates in Monday/Tuesday.
Then interior goes back in and we get to tuning.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
10-14-2019, 10:12 AM
|
#2299
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
10-14-2019, 10:29 AM
|
#2300
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,359
|
Congrats on not burning the car down. Did you get an x-ray on the welds?
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|